天堂国产午夜亚洲专区-少妇人妻综合久久蜜臀-国产成人户外露出视频在线-国产91传媒一区二区三区

當前位置:主頁 > 科技論文 > 力學論文 >

初始?jí)毫酮M縫寬度對毫米量級狹縫內爆轟起爆距離的影響

發布時間:2018-03-26 17:07

  本文選題:爆炸力學 切入點:起爆距離 出處:《爆炸與沖擊》2016年04期


【摘要】:為獲得狹縫內爆轟起爆距離的影響因素,分別在高度為1.0 mm,寬度為10、20、30 mm的狹縫爆轟管內,對不同初始?jí)毫ο?p0=5.0~50.0 k Pa)等當量比的乙烯/氧氣預混氣體進行了單次爆轟性能實驗研究。根據煙跡法、高速攝影圖片判定起爆位置,分析了初始?jí)毫酮M縫寬度對爆轟起爆距離的影響。結果表明:(1)p0=21.0~30.0 k Pa時,起爆距離隨著狹縫寬度的增大而逐漸縮短;(2)p0=35.0~42.5 k Pa時,起爆距離隨著狹縫寬度的增大先縮短后增大,在p0=45.0~50.0 k Pa時起爆距離隨著狹縫寬度的增大基本保持不變;(3)3種狹縫寬度下,量綱一起爆距離隨量綱一初始?jí)毫Φ淖兓(xiàn)差異較大。
[Abstract]:In order to obtain the influencing factors of detonation initiation distance in the slit, the detonation distance in the narrow slit detonation tube with a height of 1.0 mm and a width of 10 ~ 20 ~ 30 mm was obtained. An experimental study on the detonation performance of ethylene / oxygen premixed gases with the equivalent ratio of P0 / oxygen at different initial pressures was carried out. According to the smoke trace method, the location of detonation was determined by high speed photography. The effects of initial pressure and slit width on the initiation distance of detonation are analyzed. The results show that the initiation distance decreases gradually with the increase of slit width when the initiation distance increases with the increase of slit width, and the initiation distance decreases first and then increases with the increase of slit width. Under the three slit widths of 45.0 KPA and 50.0 KPA, the variation curves of the distance between dimensionality and initial pressure vary greatly with the increase of slit width.
【作者單位】: 江蘇大學能源與動力工程學院;
【基金】:國家自然科學基金項目(51306073,11402102) 江蘇省自然科學基金項目(BK20130510,BK20140524)
【分類號】:O381
,

本文編號:1668773

資料下載
論文發表

本文鏈接:http://sikaile.net/kejilunwen/lxlw/1668773.html


Copyright(c)文論論文網All Rights Reserved | 網站地圖 |

版權申明:資料由用戶31527***提供,本站僅收錄摘要或目錄,作者需要?jiǎng)h除請E-mail郵箱bigeng88@qq.com