【摘要】：用勘探線剖面圖結合鉆井與其他資料進行地質模型三維重建是三維地質建模的重要方法。其中勘探線剖面圖從二維坐標系向三維坐標系的轉換是三維建模的一個重要環節。針對當前勘探線剖面坐標轉換過程中勘探線上鉆孔并不總是布置在一條直線上(彎折勘探線)的特點,該文提出了一種構建彎折三維剖面的方法。該方法首先由剖面線的起點、終點以及勘探線上鉆孔孔口點作為轉折點構建三維折勘探線剖面框架;然后將二維剖面圖上分段轉換剖面上要素點的二維坐標到三維空間,并對跨越剖面轉折點的長邊添加轉折控制點;最后以青海某煤田勘探區的二維勘探線剖面圖數據為例,利用該勘探線剖面坐標轉換算法,實現了二維勘探線剖面圖到三維勘探線剖面圖的轉化,結果表明三維剖面上保持了原二維剖面所表達的地質模型的幾何形態。
[Abstract]:It is an important method of 3D geological modeling to reconstruct geological model by using exploration line profile combined with drilling and other data. The transformation of exploration line profile from 2D coordinate system to 3D coordinate system is an important link in 3D modeling. In view of the fact that the boreholes on the exploration line are not always arranged on a straight line (bending exploration line) in the process of coordinate transformation of the section of the exploration line, a method of constructing the curved 3D section is presented in this paper. In this method, the starting point, the end point and the hole opening point of the exploration line are used as the turning points to construct the profile frame of the 3D fold exploration line. Secondly, the 2D coordinate of the element points on the section is transferred to 3D space, and the turning point control point is added to the long side crossing the turning point of the section. Finally, taking the data of 2D profile of exploration line in a coalfield exploration area in Qinghai as an example, using the algorithm of coordinate transformation of the section of exploration line, the transformation from 2D profile to 3D profile is realized. The results show that the geometry of the geological model expressed by the original 2D profile is preserved on the 3D profile.
【作者單位】： 遼寧工程技術大學測繪與地理科學學院;中國測繪科學研究院地理信息工程重點實驗室;中國礦業大學(北京)地球科學與測繪工程學院;
【基金】：國家自然科學基金項目(41272367) 國土資源部地質信息技術重點實驗室開發基金項目(201407)
【分類號】：P628

【相似文獻】

相關期刊論文 前3條

1 劉柏根;;勘探線剖面圖斜孔投影及繪制[J];中州煤炭;2013年12期

2 桂穎;易萬程;;基于三維GIS的地質勘探線剖面圖自動繪制軟件的研究[J];計算機時代;2010年12期

3 ;[J];;年期

，

本文編號：2391819