本文選題：采煤機 + 滾筒三向力��； 參考：《機械強度》2017年03期

【摘要】：為了研究實際工況下,牽引速度對采煤機滾筒工作載荷的影響,采用Tikhonov正則化方法,構建截齒載荷重構模型,并推演出牽引速度與截齒載荷關系,建立滾筒與牽引部相互耦合的動力學系統模型,運用數值仿真的方法對模型求解,并對結果運用數理統計方法得出不同牽引速度下采煤機滾筒三向力的均值及標準差,最后進行實驗驗證,結果表明仿真數據與實驗數據的均值和標準差誤差范圍小于5%,驗證了理論模型的正確性。
[Abstract]:In order to study the influence of traction speed on the working load of shearer drum under actual working conditions, a reconstruction model of gear cutting load was constructed by Tikhonov regularization method, and the relationship between traction speed and gear cutting load was deduced. The dynamic system model of the coupling between the drum and the traction part is established, and the numerical simulation method is used to solve the model. The mean value and standard deviation of the three-way force of the shearer drum under different traction speeds are obtained by using the mathematical statistics method. Finally, the experimental results show that the error range of the mean value and standard deviation between the simulation data and the experimental data is less than 5, which verifies the correctness of the theoretical model.
【作者單位】： 遼寧工程技術大學機械工程學院;煤炭工業協會高端綜采成套裝備動力學測試與大數據分析中心;
【基金】：國家能源研發(實驗)中心重大項目(2010_215) 國家青年科學基金項目(51504121)資助~~
【分類號】：TD421.6

【相似文獻】

相關期刊論文 前2條

1 周萬春;柯昌青;佟海龍;李巖松;陳玉博;;采煤機牽引速度初步分析[J];煤礦機械;2012年03期

2 ;[J];;年期

，

本文編號：2096594