本文選題：形狀記憶合金 + 驅動器　； 參考：《東北大學》2012年碩士論文

【摘要】：形狀記憶合金具有功重比大、驅動能力強、占用空間小等特點,適合驅動某些微泵。本文以記憶合金和微泵為研究背景,提出了柵欄式記憶合金板的概念,用柵欄式記憶合金板為驅動器,驅動無閥微泵。 論文在總結國內外相關研究成果的基礎上做了以下工作。提出了柵欄式記憶合金板的概念,以形狀記憶合金本構關系和梁的大撓度變形為依據,推導出柵欄式記憶合金板驅動器的本構模型,得到了記憶合金宏觀應力、應變、和溫度的本構關系。通過記憶合金特性相關參數的實驗,得到了不同溫度下彈性模量、應力影響系數、記憶合金相變溫度等模型特性的數據。設計了檢驗柵欄式記憶合金本構模型的實驗裝置,此裝置可以測得記憶合金溫度和變形的關系。通過高速攝像和單片機控制得到的實驗數據,評價已推導的模型。在此基礎上通過仿真分析了風速對柵欄式記憶合金板的影響效率。 在對無閥泵的研究中,論文對無閥泵的口型進行了改進,通過仿真分析了速度、壓力和流量場,實現了無閥微泵效率的優化。
[Abstract]:Shape memory alloy (SMA) is suitable for driving some micropumps because of its high power to weight ratio, strong driving ability and small space occupation. In this paper, the concept of palisade memory alloy plate is put forward based on the memory alloy and micropump. The valveless micropump is driven by the palisade memory alloy plate. On the basis of summarizing the related research results at home and abroad, the thesis has done the following work. Based on the constitutive relation of shape memory alloy and the large deflection deformation of beam, the constitutive model of the bar memory alloy plate driver is derived, and the macroscopic stress and strain of the memory alloy are obtained. And temperature. Through the experiment of the parameters related to the properties of the memory alloy, the data of the elastic modulus, the influence coefficient of stress and the phase transition temperature of the memory alloy were obtained at different temperatures. An experimental device for testing the constitutive model of the palisade memory alloy is designed. The relationship between temperature and deformation of the alloy can be measured by this device. Based on the experimental data obtained by high speed camera and single chip computer control, the derived model is evaluated. On this basis, the effect of wind speed on the efficiency of the palisade memory alloy plate is analyzed by simulation. In the research of valveless pump, the orifice of valveless pump is improved, and the efficiency of valveless micro-pump is optimized by simulation and analysis of velocity, pressure and flow field.
【學位授予單位】：東北大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TG139.6;TH134

【參考文獻】

相關期刊論文 前10條

1 張小喜,沈庭芝,畢革平;金屬圖像處理算法的研究[J];北京理工大學學報;2000年06期

2 李周,汪明樸,徐根應,程建奕;形狀記憶合金寬滯后效應的研究[J];材料導報;2003年02期

3 楊冠軍,鄧炬;Ti-Ni-Nb寬滯后記憶合金的研究進展[J];稀有金屬材料與工程;1998年06期

4 霍永忠,陳遠富,祖小濤,陳孟思,涂銘旌;NiTi形狀記憶合金拉伸實驗及數值模擬[J];功能材料;1999年01期

5 盧永奎,許e，

本文編號：2097802