本文選題：模態綜合法 + 柔性連接　； 參考：《華中科技大學》2012年碩士論文

【摘要】：模態綜合法是一種利用子結構的模態數據計算得到裝配結構動特性的方法。其基本思想是將一個大型復雜結構根據結構特點劃分成若干子結構。模態綜合中子結構的模態既可以通過數值方法得到，也可以由試驗數據擬合得到。為了推廣模態綜合法在工程中的應用，本文對模態綜合法實現過程所涉及的理論與技術進行了研究，并開發了面向工程應用的模態綜合求解系統。 首先，本文對模態綜合法的研究現狀進行了總結。介紹了模態綜合法的基本算法，推導出剛性連接下第二次坐標變換式的通式，分別求出固定界面法與自由界面法下的第二次坐標變換表達式。并對綜合實現過程中柔性連接的處理方法進行了研究。本文還對模型縮聚和相關性分析的理論方法進行了研究。 然后，本文研究了模態綜合的實現技術，提出了一種基于DMAP和VC++的模態綜合實現路線，開發了模態綜合求解計算系統。本文在理論研究的基礎上，利用Nastran可靠的矩陣計算能力，實現模態綜合法的程序化。同時，系統還具備模型縮聚與相關性分析功能。本文根據模態綜合計算、模型縮聚計算和相關性分析計算中用到的數據類型統一設計了數據結構并研究了實現這些計算功能過程中用到的關鍵算法流程。 最后，本文對系統的計算功能進行了驗證。結果表明，，本文的研究成果具備工程應用價值。
[Abstract]:The modal synthesis method is a method to calculate the dynamic characteristics of assembly structures by using the modal data of substructures. The basic idea is to divide a large complex structure into several substructures according to its structural characteristics. The modes of the modal synthesis neutron structure can be obtained either by numerical method or by fitting the experimental data. In order to extend the application of modal synthesis method in engineering, the theory and technology involved in the realization process of modal synthesis method are studied in this paper, and a modal synthesis solution system for engineering application is developed. Firstly, the research status of modal synthesis method is summarized in this paper. This paper introduces the basic algorithm of modal synthesis method, deduces the general formula of the second coordinate transformation formula under rigid connection, and calculates the second coordinate transformation expression under the fixed interface method and the free interface method respectively. The processing method of flexible connection in the process of synthesis implementation is also studied. The theoretical methods of model Polycondensation and correlation analysis are also studied in this paper. Then, this paper studies the realization technology of modal synthesis, puts forward a realization route of modal synthesis based on DMAP and VC, and develops a calculation system of modal synthesis solution. On the basis of theoretical research, this paper uses Nastran's reliable matrix computing ability to realize the programming of modal synthesis method. At the same time, the system also has the function of model condensation and correlation analysis. This paper designs the data structure according to the data types used in modal synthesis calculation, model condensation calculation and correlation analysis calculation, and studies the key algorithms used in the realization of these computing functions. Finally, the calculation function of the system is verified. The results show that the research results of this paper have engineering application value.
【學位授予單位】：華中科技大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH113

【參考文獻】

相關期刊論文 前9條

1 張德文;結構動力分析中的逐級近似縮聚法[J];固體力學學報;1994年04期

2 殷學綱,董明,黃河;混合界面模態綜合法的模態修正方法[J];計算結構力學及其應用;1987年04期

3 張德文;改進Guyan～遞推減縮技術[J];計算結構力學及其應用;1996年01期

4 應祖光,邱吉寶;基于固定界面與自由界面子結構模態的混成模態綜合方法及其應用[J];計算力學學報;1997年01期

5 王文亮,杜作潤;動態子結構法的國內進展[J];力學進展;1985年01期

6 向樹紅,晏廷飛,邱吉寶,王大鈞;40噸振動臺虛擬試驗仿真技術研究[J];宇航學報;2004年04期

7 應祖光;邱吉寶;潭志勇;;精確剩余模態及其綜合技術[J];振動工程學報;1996年01期

8 張正平;邱吉寶;王建民;向樹紅;;航天器結構虛擬動態試驗技術新進展[J];振動工程學報;2008年03期

9 樓夢麟;連接子結構與子結構模態綜合法[J];振動工程學報;1995年01期

相關碩士學位論文 前1條

1 李劍;有限元模型參數型修正方法的研究[D];上海交通大學;2007年

本文編號：1966771