小型液壓壓力機液壓控制系統設計及仿真(英文)
本文關鍵詞:小型液壓壓力機液壓控制系統設計及仿真(英文)
更多相關文章: 液壓壓力機 液壓系統 液壓缸 PLC控制
【摘要】:設計了一種采用PLC控制的小型液壓壓力機的液壓系統,主要進行了系統設計、液壓缸內徑的確定、PLC系統配置和選型以及控制程序設計,該系統主要特點在于響應快,高效率,操作方便,工作可靠。同時采用AMESim液壓機械仿真軟件對該液壓系統進行了仿真分析。仿真結果表明:在壓力機液壓系統設計中采用輔助缸來實現快速上下行,響應速度快,工作效率高,功率損失少,為液壓壓力機的液壓系統設計及其半自動化控制提供了一定的理論參考。
【作者單位】: 華東交通大學機電工程學院;
【關鍵詞】: 液壓壓力機 液壓系統 液壓缸 PLC控制
【基金】:supported by the National Natural Science Foundation of China (Nos.51475165,11462004)
【分類號】:TH137
【正文快照】: 1 IntroductionIn the late 60’s of the twentieth century,a numberof large hydraulic press in our country started to bedesigned and built autonomously[1-2].A lot of dif-ferent tonnages of hydraulic press were exported after1970s.From then on,China accompl
【相似文獻】
中國期刊全文數據庫 前10條
1 孫以澤,徐本洲,王祖溫;On the method of the automatic modeling in hydraulic pipe networks[J];Journal of Harbin Institute of Technology;2003年02期
2 ;The Information for the Fifth International Symposium on Electro-hydraulic Power Transmission and Control Technology[J];機床與液壓;2014年06期
3 韓冬;龔國芳;楊華勇;劉毅;廖湘平;;Waveforms analysis and optimization of new electro-hydraulic excitation technology[J];Journal of Central South University;2014年08期
4 ;Low-speed instability analysis for hydraulic motor based on nonlinear dynamics[J];Journal of Coal Science & Engineering(China);2010年03期
5 何清華;郝鵬;張大慶;;Modeling and parameter estimation for hydraulic system of excavator's arm[J];Journal of Central South University of Technology;2008年03期
6 Etsujiro Imanishi;Takao Nanjo;;Fast simulation of flexible multibody dynamics with electric-hydraulic drive system[J];Theoretical & Applied Mechanics Letters;2013年01期
7 何清華;賀湘宇;朱建新;;Fault detection of excavator’s hydraulic system based on dynamic principal component analysis[J];Journal of Central South University of Technology;2008年05期
8 廖義德,劉銀水,黃艷,李壯云;Flow and cavitation characteristics of water hydraulic poppet valves[J];Journal of Harbin Institute of Technology;2002年04期
9 ;GRAY-BOX" MODELING METHOD AND PARAMETERS IDENTIFICATION FOR LARGE-SCALE HYDRAULIC SYSTEM[J];Chinese Journal of Mechanical Engineering;2003年01期
10 ;Dynamic simulation and optimal control strategy for a parallel hybrid hydraulic excavator[J];Journal of Zhejiang University(Science A:An International Applied Physics & Engineering Journal);2008年05期
,本文編號:1125678
本文鏈接:http://sikaile.net/kejilunwen/jixiegongcheng/1125678.html