退火溫度對汽車用高強鋼組織和拉伸性能的影響
發布時間:2019-07-19 19:45
【摘要】:通過對自制的高強鋼進行退火處理,研究了退火溫度對高強鋼組織和拉伸性能的影響。研究結果表明,當退火溫度較低時,高強鋼組織中主要為馬氏體;隨退火溫度升高,馬氏體逐漸向貝氏體和珠光體轉變。當退火溫度為850℃時,高強鋼的拉伸強度為631.4 MPa,伸長率為22.6%。
[Abstract]:The effect of annealing temperature on the microstructure and tensile properties of self-made high strength steel was studied. The results show that when the annealing temperature is low, the microstructure of high strength steel is mainly martensite, and with the increase of annealing temperature, the martensite gradually changes to bainite and pearlite. When the annealing temperature is 850 鈩,
本文編號:2516454
[Abstract]:The effect of annealing temperature on the microstructure and tensile properties of self-made high strength steel was studied. The results show that when the annealing temperature is low, the microstructure of high strength steel is mainly martensite, and with the increase of annealing temperature, the martensite gradually changes to bainite and pearlite. When the annealing temperature is 850 鈩,
本文編號:2516454
本文鏈接:http://sikaile.net/kejilunwen/jinshugongy/2516454.html
最近更新
教材專著