【摘要】：使用鹽酸和硝酸溶解樣品,采用基體匹配法繪制校準曲線消除基體效應的影響,選擇靈敏度高且不受共存元素影響的譜線Be 313.107nm作為分析線,建立了電感耦合等離子體原子發射光譜法(ICP-AES)測定鋁合金中鈹質量分?jǐn)?shù)為0.000 05%~0.000 5%的分析方法。方法中鈹?shù)臋z出限為0.000 001 6%(質量分?jǐn)?shù))。鈹質量濃度在0.002~0.020μg/mL范圍內,校準曲線的線性回歸方程為I=8.894×106ρ+1.747×105,相關系數r=0.999 6。按照實驗方法測定鋁合金標準樣品中鈹,測定值與認定值一致,相對標準偏差(RSD,n=8)小于10%。
[Abstract]:The sample was dissolved by hydrochloric acid and nitric acid, the calibration curve was drawn by matrix matching method to eliminate the influence of matrix effect, and the spectral line Be 313.107nm with high sensitivity and not affected by coexisting elements was selected as the analysis line. A method for the determination of beryllium in aluminum alloy by inductively coupled plasma atomic emission spectrometry (ICP-AES) was established. The detection limit of beryllium is 0.000 (mass fraction). When the mass concentration of beryllium is in the range of 0.002 ~ 0.020 渭 g / mL, the linear regression equation of the calibration curve is I 鈮，

本文編號：2473684