【摘要】：研究了冷加工變形量、退火溫度和退火時間對617B合金管材組織及力學性能的影響。結果表明:隨著變形量的增大,晶粒沿著最大主變形方向被拉長,形成了長條狀的形變帶,合金室溫抗拉強度和屈服強度逐漸提高,延伸率下降;當退火溫度從1080℃提高到1160℃時,隨著退火溫度的提高,合金的晶粒逐漸長大,抗拉強度和屈服強度降低,塑性提高,退火溫度到1160℃以上繼續提高溫度,晶粒長大速度明顯增大,強度和塑性變化不大;不同變形量下合金晶粒長大的激活能Q均遠大于純Ni的自擴散激活能,且Q值隨著變形量的增加先升高后降低;合金晶粒長大指數η值隨著退火溫度的提高先增大后減小。
[Abstract]:The effects of cold working deformation, annealing temperature and annealing time on the microstructure and mechanical properties of 617B alloy pipe were studied. The results show that with the increase of the amount of deformation, the grain is elongated along the direction of maximum main deformation, forming a long strip deformation band. The tensile strength and yield strength of the alloy at room temperature increase gradually, and the elongation decreases. With the increase of annealing temperature from 1080 鈩，

本文編號：2397017