【摘要】：采用Gleeble-3500熱模擬機,在變形溫度為950~1 150℃、應變速率為0.001~10s-1的條件下,研究了粗大柱狀晶粒純鎳的熱變形行為和加工圖.結果表明:熱壓縮過程中流變應力隨應變速率增大而增大,隨變形溫度降低而增大.流變應力與應變速率、變形溫度之間的關系用Zener-Hollomon參數來描述,熱變形激活能為312.4kJ/mol.基于動態材料模型(DMM)熱加工圖及結合合金相顯微組織分析,得到純鎳較優的熱加工參數:變形溫度為1 060~1 120℃,應變速率為0.03~0.20s-1的蛋形區域.
[Abstract]:The thermal deformation behavior and processing diagram of coarse columnar grain pure nickel were studied by using Gleeble-3500 thermal simulator under the condition of 950U 1 150 鈩，

本文編號：2383003