【摘要】：采用分離式霍普金森壓桿和終點彈道實驗裝置,研究了α+β區和β區鍛造的TC21鈦合金的動態力學性能和抗彈性能。結果表明:在動態壓縮試驗條件下,α+β區鍛造的TC21鈦合金較之β區鍛造的TC21鈦合金具有更高的動態強度,而β區鍛造的TC21鈦合金的臨界斷裂應變更大,具有更好的動態塑性變形能力;在12.7 mm穿甲彈侵徹條件下,無論是α+β區還是β區鍛造的TC21鈦合金靶板的抗彈性能均與TC4鈦合金靶板的抗彈性能相近,這可能是由于TC21鈦合金和TC4鈦合金靶板都易于發生絕熱剪切破壞所導致。α+β區鍛造的雙態組織靶板的損傷模式為塑性擴孔導致的背部崩落破壞模式,β區鍛造的片層組織靶板的損傷模式為脆性破碎模式;2種組織靶板的失效破壞均為絕熱剪切帶和其誘發的裂紋所導致。
[Abstract]:The dynamic mechanical properties and elastic resistance of TC21 titanium alloy forged in 偽 尾 region and 尾 region were studied by using split Hopkinson pressure bar and end-point ballistic apparatus. The results show that the dynamic strength of 偽 尾 -region forged TC21 titanium alloy is higher than that of 尾 -region forged TC21 titanium alloy, and the critical fracture strain of 尾 -region forged TC21 titanium alloy is higher under dynamic compression test. Have better dynamic plastic deformation ability; Under the penetration condition of 12.7 mm armor piercing projectile, the elastic resistance of TC21 titanium alloy plate forged in 偽 尾 region or 尾 region is similar to that of TC4 titanium alloy target plate. This may be due to the adiabatic shear failure of both TC21 titanium alloy and TC4 titanium alloy target plate. The damage mode of 尾 -region forged lamellar target plate is brittle fracture mode. The failure of the two kinds of target plates is caused by adiabatic shear band and cracks induced by them.
【作者單位】： 北京理工大學沖擊環境材料技術重點實驗室;
【分類號】：TG146.23

【相似文獻】

相關期刊論文 前3條

1 李曉源;時捷;董瀚;;不同強度的40CrNi2Mo鋼抗彈性能研究[J];兵器材料科學與工程;2008年01期

2 孫葆森;;2139裝甲鋁合金的抗彈性能[J];兵器材料科學與工程;2010年05期

3 ;[J];;年期

，

本文編號：2379487