【摘要】：以NiCr/Cr3C2-10%CaF2(質量分?jǐn)?shù),%)復合粉末為原料,采用激光熔覆技術在Ti-6Al-4V合金表面成功制備出了γ-NiCrAlTi/TiC/CaF2高溫自潤滑耐磨復合涂層。為研究該復合涂層的高溫穩定性,在600℃下分別對該復合涂層保溫24、48、96 h,并分別研究了不同保溫時間下復合涂層的物相、顯微硬度、摩擦學性能的變化及其機理。結果表明:高溫處理前后復合涂層物相組成基本不變,由于γ-NiCrAlTi固溶體的溶解,涂層顯微硬度下降約110 HV0.3;高溫處理前后涂層的摩擦系數及磨損率變化較小,在長時間高溫保溫情況下,涂層的組織和摩擦學性能都表現出良好的高溫穩定性。
[Abstract]:The Ni-NiCrAlTi/ TiC/ CaF2 high-temperature self-lubricating and wear-resistant composite coating was successfully prepared on the surface of the Ti-6Al-4V alloy by using the laser cladding technology as the raw material with the composite powder of NiCr/ Cr3C2-10% CaF2 (mass fraction,%) as the raw material. In order to study the high-temperature stability of the composite coatings, the composite coatings were incubated at 600 鈩，

本文編號：2370950