【摘要】：金屬在高溫?zé)嵝巫冞^程中,相變常常發生在形變過程中,塑性形變和相變同步進行。在此過程中,一方面相變的發生消耗了形變儲存能,另一方面形變的發生又會造成新能量的積累和晶體缺陷的產生,能量狀態、缺陷分布等和先形變后相變過程的不同,整個過程完全是動態的。圍繞新型近α型鈦合金—TA15鈦合金的熱壓縮模擬試驗,從介觀角度出發,綜合運用現代塑性加工學、金屬學、金相學、有限元方法、晶體塑性理論、元胞自動機理論、計算機編程語言等多種理論和方法,對TA15鈦合金在熱壓縮變形過程中發生的相變行為進行了系統研究,模擬了合金的相變過程,動態再現了相變發生時的微觀組織的演變情況,建立了不同變形條件下的相變動力學方程。這對于合理制定變形過程中的熱加工工藝方案,對鈦合金的發展和實際應用的促進都具有極為重要的理論價值和實際意義。
[Abstract]:In the process of high temperature thermal deformation, the transformation often occurs in the process of deformation, and the plastic deformation and the phase transition take place simultaneously. In this process, on the one hand, the occurrence of phase transition consumes the storage energy of deformation, on the other hand, the occurrence of deformation will lead to the accumulation of new energy and the generation of crystal defects, energy state, defect distribution, etc. The whole process is completely dynamic. Focusing on the thermal compression simulation test of a new type of near 偽 type titanium alloy, TA15 titanium alloy, from the point of view of mesoscopic, the application of modern plastic processing, metallography, finite element method, crystal plasticity theory, cellular automata theory, metallography, finite element method, and cellular automata theory are comprehensively applied. In this paper, the phase transformation behavior of TA15 titanium alloy during hot compression deformation is systematically studied by computer programming language, and the transformation process of the alloy is simulated, and the evolution of microstructure during phase transformation is dynamically reproduced. The kinetic equations of phase transformation under different deformation conditions are established. It is of great theoretical value and practical significance for the development and practical application of titanium alloy, and it is of great theoretical value and practical significance for the rational formulation of the hot working process in the deformation process and the promotion of the development and practical application of titanium alloy.
【作者單位】： 合肥工業大學材料科學與工程學院;
【基金】：國家自然科學基金項目(51175137|E050802) 安徽省自然科學基金項目(1308085JGD02)資助
【分類號】：TG146.23

【參考文獻】

相關期刊論文 前4條

1 灻湘龍;易幼平;李蓬川;沙愛學;;TC18鈦合金模鍛件鍛造成形工藝仿真[J];鍛壓技術;2012年05期

2 洪權,張振祺;Ti-6Al-2Zr-1Mo-1V合金的熱變形行為[J];航空材料學報;2001年01期

3 皮華春;韓靜濤;薛永棟;TIEU A Kiet;姜正義;;金屬塑性成形的晶體塑性學有限元模擬研究進展[J];機械工程學報;2006年03期

4 李梁,孫健科,孟祥軍;鈦合金的應用現狀及發展前景[J];鈦工業進展;2004年05期

【共引文獻】

相關期刊論文 前10條

1 徐文臣;單德彬;呂炎;;利用BP神經網絡預測BT20鈦合金的流動應力[J];兵器材料科學與工程;2007年03期

2 黃曉霞;李榮強;張艷霞;;鈦合金緊固件的腐蝕及其防護技術[J];材料保護;2008年06期

3 張偉;楊伏良;甘衛平;歐定斌;;Al-35Si 高硅鋁合金熱變形行為的研究[J];材料導報;2005年10期

4 張e，

本文編號：2365552