【摘要】：針對某公司生產的R95鋼級套管屈服強度不夠的問題,采用工序能力指數法評價了熱處理工序能力指數,并用正交試驗法從淬火溫度、淬火保溫時間、回火溫度、回火保溫時間四個方面進行四因素三水平分析,提出優化后熱處理方案;優化后熱處理方案經實際驗證,大大提高了該工序能力指數;最后提出了R95鋼級套管熱處理的改進措施。
[Abstract]:Aiming at the problem that the yield strength of R95 steel casing produced by a company is not enough, the process capability index is evaluated by the method of process capability index, and the quenching temperature, quenching holding time and tempering temperature are analyzed by orthogonal test. Four factors and three levels were analyzed in four aspects of tempering time, and the optimized post-heat treatment scheme was put forward. The optimized post-heat treatment scheme has been verified by practice, and the capability index of this process has been greatly improved. Finally, the improvement measures for heat treatment of R95 steel casing have been put forward.
【作者單位】： 中國石油集團石油管工程技術研究院石油管工程重點實驗室;
【分類號】：TG161
，

本文編號：2321101