【摘要】：為了研究鑄態P91耐熱合金鋼的高溫變形流變特性,建立鑄態P91耐熱合金鋼高溫流變應力本構方程,采用Gleeble-3500熱模擬實驗機對鑄態P91耐熱合金鋼進行等溫?zé)釅嚎s實驗,研究了變形溫度為900~1200℃、應變速率為0.01~5 s-1、變形量為60%條件下的熱變形行為。研究結果表明,隨著變形溫度的升高和應變速率的降低,動態再結晶現象越容易發生,流變應力顯著降低,曲線由加工硬化型向動態回復及動態再結晶型轉變。在雙曲正弦修正的Arrhenius型方程及Zener-Hollomon參數的基礎上,考慮真應變對流動應力的影響,建立了鑄態P91耐熱合金鋼的流變應力模型及本構方程。誤差分析表明,所建立的本構方程具有良好的精度。
[Abstract]:In order to study the rheological properties of as-cast P91 heat-resistant alloy steel during high temperature deformation, the constitutive equation of high temperature rheological stress of as-cast P91 heat-resistant alloy steel was established. The isothermal compression test of as-cast P91 heat-resistant alloy steel was carried out by Gleeble-3500 thermal simulation machine. The thermal deformation behavior was studied under the condition of the deformation temperature of 900 鈩，

本文編號：2285169