【摘要】：針對外層引入氮氧混合氣體的氣體熔池耦合活性TIG焊電弧,采用Boltzmann作圖法分析在不同耦合度下電弧等離子體的溫度分布和電弧電壓的變化規律,并與傳統TIG焊及外層只引入氧氣的氣體熔池耦合活性TIG焊進行比較.結果表明,氮氧聯合過渡時氣體熔池耦合活性TIG焊電弧的中心區域溫度和電弧電壓均高于傳統TIG焊與外層只引入氧氣時的氣體熔池耦合活性TIG焊的數值;當耦合度由0變?yōu)?2時,電弧中心區域溫度與電弧電壓均略有升高.
[Abstract]:In this paper, the temperature distribution and arc voltage variation of arc plasma under different coupling degrees are analyzed by means of Boltzmann drawing method for the active TIG welding arc with nitrogen and oxygen mixed gas in the outer layer. The results are compared with conventional TIG welding and gas pool coupled active TIG welding which only introduces oxygen into the outer layer. The results show that the central temperature and arc voltage of the gas weld pool coupled active TIG welding are higher than those of the conventional TIG welding and the gas weld pool coupled active TIG welding when only oxygen is introduced into the outer layer. When the coupling degree changed from 0 to 2, the temperature and voltage of the arc center increased slightly.
【作者單位】： 蘭州理工大學甘肅省有色金屬新材料省部共建國家重點實驗室;蘭州理工大學有色金屬合金及加工教育部重點實驗室;
【基金】：國家自然科學基金資助項目(51265029)
【分類號】：TG444.74

【相似文獻】

相關期刊論文 前10條

1 陳劍虹 ,陳越耿 ,成富山;數字電弧電壓分析儀[J];甘肅工業大學學報;1980年02期

2 石s，

本文編號：2275598