【摘要】：以北京理工大學自主研發的新型近β型鈦合金Ti684為研究對象,以Ti-6Al-4V為參比,研究了Ti684合金的微觀組織、動態力學性能以及其作為裝甲材料的抗彈性能。結果表明:經900℃/15 min/WQ處理后的Ti684組織由尺寸為150μm左右的等軸β相大晶粒組成;經應變率為2600s-1的動態壓縮測試后,900℃/15 min/WQ處理的Ti684較Tβ以下固溶時效處理的Ti-6Al-4V具有更高的動態強度1870 MPa和斷裂失效應變0.20。具有較好動態力學性能的同時,900℃/15 min/WQ處理的Ti684在靶試抗沖擊過程中產生了應力誘發馬氏體,延緩了絕熱剪切帶的形成,表現出了比Ti-6Al-4V試樣更好的抗彈性能。
[Abstract]:The microstructure, dynamic mechanical properties and elastic resistance of a new type of nearly 尾 -titanium alloy, Ti684, which was developed by Beijing Institute of Technology, and Ti-6Al-4V as reference, were studied in this paper. The results show that the structure of Ti684 treated at 900 鈩，

本文編號：2270581