【摘要】：以一種高強度低合金鋼為研究對象,分析了淬火-亞溫淬火-回火(RQ-IQ-T)工藝與控軋控冷-亞溫淬火-回火(TMCP-IQT)工藝對組織演變及力學性能的影響,并對不同顯微組織特征實驗鋼的沖擊斷裂行為進行討論。結果表明:RQ-IQ-T工藝獲得的顯微組織由條狀鐵素體與回火馬氏體構成,試樣-40℃沖擊功達到205 J;而TMCP-IQ-T工藝獲得的顯微組織則由塊狀鐵素體與回火馬氏體組成,試樣具有較高的強度,但沖擊功相對較低,僅為149 J。沖擊裂紋在條狀鐵素體中擴展包括沿長軸方向和剪切條狀鐵素體兩種方式;在塊狀鐵素體中主要以穿晶方式進行擴展。經RQ-IQ-T工藝獲得的條狀鐵素體與回火馬氏體雙相組織對裂紋擴展具有較大的阻礙作用,有利于沖擊韌性的提高。
[Abstract]:Taking a kind of high strength low alloy steel as an example, the effects of quenching, subtemperature quenching and tempering (RQ-IQ-T) process and controlled rolling controlled cooling quenching tempering (TMCP-IQT) process on microstructure evolution and mechanical properties were analyzed. The impact fracture behavior of experimental steel with different microstructure characteristics was discussed. The results show that the microstructure obtained by the WRQ-IQ-T process is composed of stripe ferrite and tempered martensite, and the impact energy at -40 鈩，

本文編號：2204196