【摘要】：采用正交試驗方法,研究了不同熱處理制度對TC4鈦合金厚板顯微組織和力學性能的影響。結果表明,固溶溫度對合金顯微組織、室溫拉伸強度、塑性和斷裂韌性影響很大。相變點下固溶時合金組織為雙態組織,相變點上固溶時合金組織為魏氏組織;當固溶溫度從975℃相變點下增加到1045℃相變點上時合金的強度變化不大,合金的塑性大幅下降,而合金的斷裂韌性逐漸升高;TC4鈦合金厚板在975℃/10 min+670℃/1 h熱處理,可獲得最佳強度-塑性匹配,在995℃固溶處理,670~760℃時效處理可獲得最佳強度-韌性匹配。
[Abstract]:The effects of different heat treatment conditions on the microstructure and mechanical properties of TC4 titanium alloy thick plate were studied by orthogonal test. The results show that the solution temperature has great influence on microstructure, tensile strength at room temperature, plasticity and fracture toughness. At the transformation point, the microstructure of the alloy is two-state structure, and the microstructure of the alloy is Weichen structure when the solution temperature is increased from 975 鈩，

本文編號：2172173