【摘要】：利用熱模擬技術、金相觀察及定量統計,通過分析Fe-40Ni-Ti合金快速升溫過程中試樣不同部位的晶粒長大規律,模擬研究了焊接過程中奧氏體晶粒的長大行為。結果表明:溫度最高的中心線附近晶粒長大顯著,5s內溫度達到1350℃時,其尺寸達到了180μm;而距離中心線4mm處的熱影響區及母材(試樣端部)晶粒變化不大,在80μm左右。金相觀察發現TiN顆粒對晶界遷移產生了明顯的阻礙作用。
[Abstract]:By means of thermal simulation, metallographic observation and quantitative statistics, the austenite grain growth behavior in welding process was simulated by analyzing the grain growth in different parts of Fe-40Ni-Ti alloy during rapid heating. The results show that the grain size reaches 180 渭 m when the temperature reaches 1350 鈩，

本文編號：2156780