發布時間：2018-06-06 10:30

  本文選題：壓鑄 + 壓室�。� 參考：《金屬學報》2015年06期

【摘要】：基于熱傳導反算法,建立了液態金屬與壓室之間傳熱的二維反算數學模型,設計了壓室內部測溫模塊并進行了針對Al-9%Si-3%Cu合金的靜態無壓射和常規壓鑄實驗.基于實驗中測得的壓室內部不同位置的溫度,求解得到了液態金屬在壓室中的溫度場及其不同位置的界面換熱系數,為預測壓室預結晶提供可靠依據.結果表明,靜態無壓射條件與常規壓鑄條件下液態金屬與壓室界面換熱情況差異很大,同時壓室中間界面換熱系數均隨液態金屬流動方向依次降低,壓室壁溫度也存在兩端高中間低的分布.在常規壓鑄條件下,由于沖頭運動的影響,壓室末端換熱系數存在雙峰現象.
[Abstract]:Based on the inverse heat conduction algorithm, a two-dimensional inverse mathematical model of heat transfer between liquid metal and pressure chamber is established. The temperature measurement module in the chamber is designed and the static pressureless and conventional die casting experiments for Al-9%Si-3%Cu alloy are carried out. The temperature field of liquid metal in the chamber and the interfacial heat transfer coefficient at different positions are obtained based on the temperature at different positions of the chamber measured in the experiment, which provides a reliable basis for predicting the precrystallization of the chamber. The results show that the heat transfer between liquid metal and chamber is very different between static pressure free ejection condition and conventional die casting condition, and the heat transfer coefficient of the middle interface of pressure chamber decreases in turn with the flow direction of liquid metal. The pressure chamber wall temperature also has the distribution of both ends high and middle low. Under conventional die-casting conditions, the heat transfer coefficient at the end of the chamber has a bimodal phenomenon due to the impact of punch movement.
【作者單位】： 清華大學材料學院;
【基金】：國家自然科學基金項目51275269和51205229 國家科技重大專項項目2012ZX04012011資助~~
【分類號】：TG249.2

【參考文獻】

相關期刊論文 前4條

1 ;Study on Numerical Simulation of Mold Filling and Heat Transfer in Die Casting Process[J];Journal of Materials Science & Technology;2000年03期

2 郭志鵬;熊守美;f蓄，

本文編號：1986218