發布時間：2018-05-17 11:51

  本文選題：擠壓鑄造 + 模具��； 參考：《特種鑄造及有色合金》2015年12期

【摘要】：研究了固定夾的生產工藝過程,提出了模具溫度對固定夾凝固結晶的影響;給出了固定夾工藝參數的控制結果。認為擠壓鑄造工藝替代低壓鑄造或重力鑄造工藝生產固定夾,不論在產品品質還是在生產效率方面都具有明顯優勢。生產固定夾模具工作溫度控制在180~260℃的范圍最為理想;當充型速度從145mm/s降至70mm/s,在同樣T6熱處理后,鑄件表面氣泡率小于5%。
[Abstract]:The production process of fixed clamp is studied, the effect of die temperature on solidification crystallization of fixed clip is put forward, and the control results of process parameters of fixed clamp are given. It is concluded that the squeeze casting process can replace the low pressure casting or gravity casting process in the production of fixed clamps, both in terms of product quality and production efficiency. The working temperature of the fixed clamping die is controlled in the range of 180 ~ 260 鈩，

本文編號：1901257