本文選題：研磨 + 無打滑��； 參考：《中南大學學報(自然科學版)》2015年07期

【摘要】：基于臥式研球機在研磨時鋼球與研磨盤之間不發生打滑現象,建立鋼球的研磨運動方程,并通過MATLAB軟件求解揭示其運動規律。為使鋼球在轉動盤牽引力的作用下不發生打滑,從垂直溝槽面和沿溝槽面分別對其進行動力學分析,推導出研磨壓力及研磨盤轉速的取值范圍。以研磨盤材料HT300和鋼球材料GCr15為例,給出摩擦因數和鋼球大小對研磨曲線的影響,并說明溝槽偏置時α與β的選擇原則,為改善鋼球的表面質量提供參考。研究結果表明:通過增大盤徑來減小跡線間距的差值,進而使鋼球表面的跡線分布更加均勻化。
[Abstract]:Based on the fact that the horizontal ball grinder does not slip between the ball and the lapping disk, the motion equation of the ball grinding is established, and the motion law is revealed by MATLAB software. In order to prevent the steel ball from slipping under the action of the traction force of the rotating disc, the dynamic analysis of the ball is carried out from the vertical groove surface and along the groove surface, and the range of the grinding pressure and the rotating speed of the grinding disc is deduced. Taking HT300 and GCr15 as examples, the effects of friction factor and ball size on the grinding curve are given. The selection principle of 偽 and 尾 when groove bias is explained, which provides a reference for improving the surface quality of steel ball. The results show that the difference between the trace lines is reduced by increasing the diameter of the disk, and the distribution of the trace line on the surface of the steel ball is more uniform.
【作者單位】： 河北工程大學土木工程學院;河北工程大學機電工程學院;
【基金】：河北省科技廳科技支撐計劃項目(12212110D)~~
【分類號】：TG580.68

【參考文獻】

相關期刊論文 前10條

1 朱晨;兩種鋼球研磨方式的力學分析[J];軸承;2000年09期

2 孫立明,趙濱海,楊進周,陳俊杰,馬美玲;深溝球軸承振動和噪聲控制及相關技術探討[J];軸承;2000年10期

3 聶蘭芳,趙學軍;鋼球加工成圓條件及其影響因素探討[J];軸承;2001年01期

4 梁華;趙學軍;仇亞軍;;軸承鋼球在生產過程中表面剝落原因分析[J];軸承;2008年08期

5 張永乾;吳朝陽;;我國鋼球加工工藝設備的現狀及發展趨勢[J];軸承;2011年04期

6 周井玲;陳建春;吳國慶;陳曉陽;;試驗機結構參數對被試球接觸應力影響[J];工程力學;2011年06期

7 劉秀蓮;;鋼球精研及其精研液[J];哈爾濱軸承;2006年01期

8 苗璞;鄭多;王宇石;;鋼球?qū)S承性能的影響[J];哈爾濱軸承;2008年02期

9 薛U，

本文編號：1823518