二次重熔工藝對ZA92鎂合金半固態漿料固相顆粒的影響
發布時間:2018-04-28 06:56
本文選題:ZA鎂合金 + 二次重熔。 參考:《鑄造》2015年11期
【摘要】:采用自孕育法制備ZA92鎂合金半固態坯料,研究了二次重熔溫度和時間對ZA92鎂合金半固態固相顆粒的影響。結果表明:二次重熔溫度升高和重熔時間的延長,合金的固相率減小,平均晶粒尺寸和平均圓整度呈現先減小后增大的變化趨勢。當在570~580℃保溫30 min或在590℃保溫20 min時,可獲得理想的半固態漿料固相顆粒,其平均晶粒尺寸、圓整度和固相率分別在83~86μm、1.37~1.59和62.3%~67.8%。晶粒前期以根部熔斷和亞晶界分離機制進行分離,后期晶粒的球化、粗化滿足LSW理論。
[Abstract]:Semisolid billets of ZA92 magnesium alloys were prepared by self-inoculation method. The effects of secondary remelting temperature and time on semi-solid solid particles of ZA92 magnesium alloys were studied. The results show that with the increase of remelting temperature and the prolongation of remelting time, the solid phase ratio of the alloy decreases, and the average grain size and average roundness decrease first and then increase. The ideal solid particles of semi-solid slurry can be obtained at 570,580 鈩,
本文編號:1814244
本文鏈接:http://sikaile.net/kejilunwen/jinshugongy/1814244.html
最近更新
教材專著