本文選題：馬氏體不銹鋼　切入點：同步輻射高能X射線　出處：《金屬學報》2015年11期 　論文類型：期刊論文

【摘要】：利用自制的小型拉伸裝置對淬火+回火熱處理后的ZG06Cr13Ni4Mo馬氏體不銹鋼試樣進行單軸拉伸變形,使用同步輻射高能X射線衍射技術對鋼中逆變奧氏體力學穩定性和相變誘導塑性(transformation induced plastic,TRIP)進行原位研究.結果表明,隨著拉伸應力的增加,逆變奧氏體衍射峰積分強度逐漸減弱,逆變奧氏體在變形過程中逐步發生了形變誘導馬氏體相變.利用Rietveld全譜精修擬合方法對不同應力狀態下的逆變奧氏體相分?jǐn)?shù)進行定量分析,發現逆變奧氏體的形變誘導馬氏體相變開始于材料的宏觀彈性階段,并持續至整個塑性變形階段.通過比較分析不同熱處理工藝下逆變奧氏體的形變誘導相變過程和材料的加工硬化行為發現,逆變奧氏體的形變誘導相變的出現增加了馬氏體基體的位錯密度,導致材料加工硬化指數的提高,有效提高了材料的塑性.
[Abstract]:The ZG06Cr13Ni4Mo martensite stainless steel specimen after quenching and tempering was deformed by uniaxial tensile deformation with a self-made small drawing device. The mechanical stability of inverting austenite and transformation induced plastic transformation (induced) in steel are studied in situ by synchrotron radiation high energy X-ray diffraction technique. The results show that the intensity of diffraction peak integral decreases with the increase of tensile stress. Deformation-induced martensite transformation occurs gradually in the process of deformation of inverting austenite. The phase fraction of inverting austenite under different stress states is quantitatively analyzed by Rietveld full-spectrum refinement fitting method. It is found that the deformation-induced martensite transformation of inverting austenite begins at the macroscopic elastic stage of the material. The deformation induced transformation process of inverting austenite and the work hardening behavior of the materials under different heat treatment processes were compared and analyzed. The appearance of deformation-induced transformation of inverting austenite increases the dislocation density of martensite matrix, increases the work hardening index of the material, and effectively improves the plasticity of the material.
【作者單位】： 中國科學院金屬研究所材料科學國家(聯合)實驗室;
【基金】：國家自然科學基金資助項目51201167~~
【分類號】：TG142.71

【參考文獻】

相關期刊論文 前1條

1 王培;陸善平;李殿中;康秀紅;李依依;;低加熱速率下ZG06Cr13Ni4Mo低碳馬氏體不銹鋼回火過程的相變研究[J];金屬學報;2008年06期

【共引文獻】

相關期刊論文 前10條

1 郭秋娟;孫麗坤;樊翔宇;張國利;張海峰;慕傳友;;鍛造Cr13Ni4鋼回火工藝與逆變奧氏體及性能的關系研究[J];大型鑄鍛件;2011年03期

2 李剛;鄭琪;金春山;劉得印;;上充泵葉輪原型件的制造與評定[J];電站輔機;2013年04期

3 米豐毅;龔雪輝;袁武華;梁劍雄;;回火溫度對0Cr16Ni5Mo馬氏體不銹鋼組織和性能的影響[J];材料開發與應用;2015年01期

4 劉玉榮;業冬;徐軍;姜雯;周永恒;劉鑫;李俊;蘇杰;雍歧龍;趙昆渝;;13Cr超級馬氏體不銹鋼的組織[J];材料熱處理學報;2011年12期

5 周慶;樊新民;楊柯;單以銀;;熱處理對ZG06Cr13Ni4Mo不銹鋼組織與性能的影響[J];金屬熱處理;2012年06期

6 于航;O詞鞴，

本文編號：1652606