本文選題：微動疲勞設備　切入點：微動疲勞壽命　出處：《鑄造技術》2015年12期 　論文類型：期刊論文

【摘要】：采用自主設計的微動疲勞加載設備對機械部件使用的TA16、DD6及FGH95三種合金材料的疲勞性能進行了研究。實驗結果表明,這三種合金材料的初始疲勞裂紋首先出現在材料和微動墊相互接觸的區域,這說明這種微動疲勞加載設備具有良好的性能。DD6和FGH95合金材料的微動疲勞壽命比TA16材料的要高。
[Abstract]:The fatigue properties of TA16 DD-6 and FGH95 alloy materials used in mechanical components were studied by using the fretting fatigue loading equipment designed by ourselves. The experimental results show that, The initial fatigue cracks of the three alloys first occur in the contact region between the material and the fretting pad, which indicates that the fretting fatigue loading equipment has good properties. DD6 and FGH95 alloys have higher fretting fatigue life than that of TA16.
【作者單位】： 內蒙古機電職業技術學院;內蒙古工業大學;
【分類號】：TG14

【相似文獻】

相關期刊論文 前10條

1 蔣小松;何國求;劉兵;向?qū)W淵;胡正飛;朱e，

本文編號：1641770