本文選題：HR-鋼　切入點：陰極微弧電沉積　出處：《材料導報》2015年S2期 　論文類型：期刊論文

【摘要】：以0.8mol·L-1 Al(NO3)3·9H2O的乙醇溶液為電解液,用陰極微弧電沉積的方法在HR-2鋼表面制備出厚度約為69μm的氧化鋁陶瓷涂層,通過掃描電子顯微鏡(SEM)觀察了涂層的表面和截面形貌,通過X射線能量色散譜(EDS)及X射線衍射儀(XRD)分析了涂層的成分以及相組成,通過電化學綜合測試系統分析了涂層的電化學腐蝕性能,結果表明:涂層表面粗糙多孔,與基體呈犬牙咬合狀結合;涂層主要由α-Al2O3和γ-Al2O3組成;涂層中含有少量的Fe元素,表明膜/基界面附近的基體在微弧放電的作用下也參與了成膜;沉積氧化鋁涂層后,樣品的腐蝕電流密度降低了1個數量級,耐腐蝕性能得到提高。
[Abstract]:Alumina ceramic coatings with thickness of about 69 渭 m were prepared on the surface of HR-2 steel by cathodic micro-arc electrodeposition with the ethanol solution of 0.8mol 路L -1 Al(NO3)3 路9H2O as electrolyte. The surface and cross-section morphology of the coating were observed by scanning electron microscopy. The composition and phase composition of the coating were analyzed by X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometer (XRD). The electrochemical corrosion performance of the coating was analyzed by electrochemical comprehensive test system. The results showed that the coating surface was rough and porous. The coating consists mainly of 偽 -Al _ 2O _ 3 and 緯 -Al _ 2O _ 3. The coating contains a small amount of Fe, which indicates that the substrate near the film / substrate interface is also involved in the formation of film under the action of micro-arc discharge. The corrosion current density of the sample was reduced by one order of magnitude, and the corrosion resistance was improved.
【作者單位】： 表面物理與化學重點實驗室;中國工程物理研究院;
【分類號】：TG174.4

【相似文獻】

相關期刊論文 前2條

1 滕文華;HR-2鋼電子束二次熔焊工藝研究[J];現代制造工程;2004年12期

2 ;[J];;年期

相關會議論文 前3條

1 彭昌永;;HR-2鋼薄壁細管的電子束焊接[A];中國工程物理研究院科技年報（2002）[C];2002年

2 彭昌永;范如源;;HR-2鋼薄壁細管的電子束焊接[A];制造業與未來中國——2002年中國機械工程學會年會論文集[C];2002年

3 郎定木;白貴元;徐云生;;熱源與HR-2不銹鋼在高溫下的反應物[A];中國工程物理研究院科技年報（2000）[C];2000年

，

本文編號：1580909