本文關鍵詞： 灰鑄鐵 力學性能 斷口分析 熱暴露　出處：《鑄造技術》2015年12期 　論文類型：期刊論文

【摘要】：為了滿足高功率密度柴油機機體和汽缸蓋的材料高溫穩定性的要求,通過金相顯微分析,結合力學性能測定,研究了在熱暴露溫度不變的情況下,不同熱暴露時間對柴油機缸蓋用高強度灰鑄鐵力學性能的影響規律。結果表明:高強度灰鑄鐵在500℃不同熱暴露時間后的室溫抗拉強度隨著保溫時間的延長逐漸降低,σ_b(0 h)=340 MPa,σ_b(700 h)=280 MPa,伸長率隨著保溫時間的延長呈先升后降趨勢;隨著熱暴露時間的延長,基體組織中珠光體量逐漸降低,鐵素體量逐漸增多,珠光體量由0 h時的90%降到1 000 h時的40%左右。
[Abstract]:In order to meet the requirements of high temperature stability of high power density diesel engine block and cylinder head, the thermal exposure temperature was studied under the condition of constant thermal exposure temperature by metallographic microanalysis and mechanical property measurement. The effect of different heat exposure time on the mechanical properties of high strength gray cast iron used in cylinder head of diesel engine was studied. The tensile strength of high strength gray cast iron at room temperature decreased with the prolongation of holding time after different exposure time at 500 鈩，

本文編號：1448099