【摘要】：為了有效控制和降低全斷面巖石隧道掘進機施工時滾刀的磨損,較準確地預測滾刀的磨損量,通過室內實驗和現場實驗從地質影響因素和機械影響因素2個方面對滾刀磨損問題進行了分析。通過水泥試樣實驗,得出等效石英含量EQC和單軸抗壓強度UCS單獨對巖石磨蝕性的影響規律;通過現場巖樣實驗,得出兩者共同對巖石磨蝕性的影響規律。通過對比進口與國產TBM的刀盤刀具布置,得出滾刀破巖面積對磨損速率的影響規律;通過統計現場掘進參數與刀具磨損數據,得出場切深指數FPI對滾刀平均磨損速率的影響規律。研究結果表明:巖石對滾刀磨損的地質影響是巖石等效石英含量和單軸抗壓強度共同作用的結果;破巖面積是刀盤刀具設計參數對滾刀磨損的敏感指標;場切深指數是設備掘進參數對滾刀磨損的敏感指標。
[Abstract]:In order to effectively control and reduce the wear of hob during the construction of full-face rock tunnel boring machine and accurately predict the wear of hob, the wear of hob is analyzed from two aspects of geological and mechanical factors through laboratory and field experiments. The equivalent quartz content EQC and single quartz are obtained through cement sample test. The influence law of axial compressive strength UCS on rock abrasiveness is obtained by field rock sample test, and the influence law of both on rock abrasiveness is obtained by comparing the cutter layout of imported and domestic TBM cutters. The results show that the geological effect of rock on hob wear is the result of rock equivalent quartz content and uniaxial compressive strength; the rock breaking area is the sensitive index of cutter design parameters to hob wear; and the field cutting depth index is the parameter to hob wear. The sensitive index of hob wear.
【作者單位】： 盾構及掘進技術國家重點實驗室;
【基金】：國家重點基礎研究發展計劃(“973”計劃)項目(2014CB046906) 中鐵隧道集團科技創新計劃(隧研合2014-01)
【分類號】：U455.3

【相似文獻】

相關期刊論文 前10條

1 ;倡議書——在中國推廣應用隧道掘進機及發展中國隧道掘進機制造產業[J];巖石力學與工程學報;2002年03期

2 馬元s，

本文編號：2218226