本文選題：車聯網 + 車載終端��； 參考：《長安大學》2014年碩士論文

【摘要】：基于車聯網的車載終端與GPS導航系統通過采用先進的GPS衛星定位技術、GIS地理信息技術、CAN總線技術、GPRS無線通訊技術、嵌入式技術、互聯網技術等高科技技術，使車輛監控中心能夠時刻監視車輛的運行狀況，，并可對車輛進行有效的調度，提高車輛的運營效率；駕駛者也能通過該系統的液晶屏查看車輛當前的詳細信息，并可對車輛進行合理的維護。 本文首先分析了基于車聯網的車載終端與GPS導航系統目前國內外的發展?fàn)顩r以及開發該系統的意義，提出了該系統的總體設計，并對所需要的關鍵技術進行了簡要的介紹。其次，對系統所采用的硬件平臺進行設計，尤其是電源模塊、CAN模塊和GPS模塊電路的設計。利用Platform Builder5.0定制所需的系統并進行系統的移植。利用EVC++開發系統應用程序，包括CAN模塊的信息采集和GPS導航數據采集程序，以及相關驅動程序。最后，對系統進行了相應的測試，對所做的工作進行了總結，指出了系統存在的不足，并提出了系統進一步開發的建議。
[Abstract]:The vehicle terminal and GPS navigation system based on vehicle networking adopt advanced GPS satellite positioning technology, GIS geographic information technology, can bus technology, GPRS wireless communication technology, embedded technology, Internet technology and other high-tech technologies. So that the vehicle monitoring center can monitor the running condition of the vehicle at all times, and can carry on the effective dispatch to the vehicle, improve the operation efficiency of the vehicle, and the driver can also view the current details of the vehicle through the LCD screen of the system. And can carry on the reasonable maintenance to the vehicle. This paper first analyzes the development of vehicle terminal and GPS navigation system based on vehicle networking, and the significance of developing the system, puts forward the overall design of the system, and briefly introduces the key technologies needed. Secondly, the hardware platform used in the system is designed, especially the can module and GPS module circuit. Use Platform Builder5.0 to customize the required system and transplant the system. The application program of the system is developed by using EVC, including the information collection program of CAN module and GPS navigation data acquisition program, as well as the related driver program. Finally, the system is tested, the work done is summarized, the shortcomings of the system are pointed out, and some suggestions for further development of the system are put forward.
【學位授予單位】：長安大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：U463.67;U495

【參考文獻】

相關期刊論文 前5條

1 王保云;;物聯網技術研究綜述[J];電子測量與儀器學報;2009年12期

2 諸彤宇;王家川;陳智宏;;車聯網技術初探[J];公路交通科技(應用技術版);2011年05期

3 郭莉;嚴波;沈延;;物聯網安全系統架構研究[J];信息安全與通信保密;2010年12期

4 朱洪波;楊龍祥;于全;;物聯網的技術思想與應用策略研究[J];通信學報;2010年11期

5 孫小紅;;車聯網的關鍵技術及應用研究[J];通信技術;2013年04期

本文編號：1943569