本文選題：動態力學分析 + 澆注式瀝青膠漿　； 參考：《東南大學學報(自然科學版)》2014年05期

【摘要】：為了研究澆注式瀝青膠漿的高溫性能及評價指標,采用動態力學分析(DMA)方法,通過動態剪切流變試驗,探討了不同溫度、瀝青種類、粉膠比對澆注式瀝青膠漿高溫性能的影響.分析了廣義剪切模量與澆注式瀝青混合料高溫變形之間的相關性,探討了該指標作為澆注式膠漿高溫性能評價指標的適用性,并以車轍深度為控制標準,對廣義剪切模量以及60℃條件下的貫入度提出了建議值.結果表明:澆注式瀝青膠漿復數剪切模量和相位角受溫度、瀝青種類、粉膠比因素影響明顯;廣義剪切模量與混合料永久變形呈良好的線性關系,能作為一種合適的勁度指標評價澆注式瀝青膠漿的高溫穩定性;60℃條件下,澆注式瀝青混合料貫入度指標建議值不大于3.29 mm.
[Abstract]:In order to study the high temperature performance and evaluation index of castable asphalt mortar, the influence of different temperature, kind of asphalt and ratio of powder to binder on high temperature performance of cast asphalt mortar was studied by dynamic mechanical analysis (DMA) method and dynamic shear rheological test. The correlation between the generalized shear modulus and the high temperature deformation of cast asphalt mixture is analyzed. The applicability of this index as the evaluation index of high temperature performance of castable mortar is discussed, and the rutting depth is taken as the control standard. The generalized shear modulus and penetration at 60 鈩，

本文編號：1903224