【摘要】：結合電磁攪拌和機械攪拌,提出一種新型耦合攪拌技術,并利用該技術制備直徑為300 mm的7075鋁合金鑄錠,研究該技術對半連續鑄造參數、熔體溫度波動、鑄造液穴、鑄錠組織和成分以及合金流變應力的影響。結果表明:相比普通半連續鑄造,利用耦合攪拌技術后,半連續鑄造工藝參數范圍擴大,鑄造效率得到提高,鑄造過程中熔體溫度波動由40~50℃減小到1℃,液穴深度由128 mm減小到88 mm,鑄錠平均晶粒大小減小13%,且偏差由30%減小到9%,成分偏析也明顯減小。此外,合金流變應力減小,且鑄錠不同部位的流變應力大小差異也明顯減小。耦合攪拌技術顯著地改善熔體和鑄錠的均勻性。
[Abstract]:Combined with electromagnetic stirring and mechanical stirring, a new coupling stirring technology is proposed, and 7075 aluminum alloy ingots with diameter of 300 mm are prepared by using this technology. the effects of this technology on semi-continuous casting parameters, melt temperature fluctuation, casting liquid hole, microstructure and composition of ingot and Rheological stress of alloy are studied. The results show that compared with ordinary semi-continuous casting, the range of semi-continuous casting process parameters is expanded and the casting efficiency is improved. The melt temperature fluctuation decreases from 40 鈩，

本文編號：2526067