【摘要】：激光增材制造(Laser Additive Manufacturing,LAM)技術實際上是一種兼顧精確成形和高性能成性一體化需求的先進制造技術。首先介紹了兩種典型激光增材制造技術的成形原理及其特點;然后介紹國內外激光增材制造技術的最新研究進展;再重點介紹西安交通大學在激光增材制造技術方面的最新研究進展:(1)超聲振動輔助激光熔覆沉積對IN718沉積態組織與性能的影響;(2)感應輔助激光熔覆沉積DD4定向晶修復DZ125L葉片的研究;(3)Cu W功能梯度復合材料的激光熔覆沉積工藝研究;(4)送粉氣純度對激光熔覆Fe314修復40Cr組織與性能的影響;最后闡述了激光增材制造技術所面臨的挑戰。
[Abstract]:Laser material addition Manufacturing (Laser Additive Manufacturing,LAM) technology is actually an advanced manufacturing technology which takes into account the integration of accurate forming and high performance formability. Firstly, the forming principle and characteristics of two typical laser material addition manufacturing technologies are introduced, and then the latest research progress of laser material addition manufacturing technology at home and abroad is introduced. The latest research progress of laser material increasing technology in Xi'an Jiaotong University is introduced in detail: (1) the effect of ultrasonic vibration assisted laser coating deposition on the microstructure and properties of IN718 deposition; (2) study on the repair of DZ125L blades by induction-assisted laser cladding deposition of DD4 directional crystals; (3) study on laser cladding deposition process of) Cu W functionally graded composites; (4) effect of powder feeding gas purity on the microstructure and properties of laser-coated Fe314 repair 40Cr; Finally, the challenges of laser material increasing manufacturing technology are described.
【作者單位】： 西安交通大學機械制造系統工程國家重點實驗室;
【基金】：國家重點專項“高性能金屬結構件激光增材制造控形控性研究”(2016YFB1100102) 國家自然科學基金項目(51275392) 陜西省科技統籌創新工程計劃項目(2015KTTSGY03-06)
【分類號】：TG665
，

本文編號：2484485