【摘要】：隨著全球化快速發展及消費者意識的提高,消費者對產品需求已然提升到情感滿足層次。色彩作為產品外觀要素之一,在消費者及使用者對產品的第一反應中承擔著重要作用,它的情感聯想和對消費者影響遠大于造型及材質。在數控機床研究中,色彩研究占重要位置,數控機床配色研究有重要的意義。本課題是以色彩意象研究為基礎,以案例知識為驅動來創新的產品配色研究。旨在通過理論及實驗研究,建立基于案例數控機床雙色配色系統,在過程中分析總結數控機床配色規律,構建數控機床操作者配色意象特征并完成案例意象值匹配,以此為基礎完成配色案例庫構建,并進行檢索、評價及優化。在研究中通過探討基于3D模型數控機床雙色配色美度與配色相關因素如配色區域和色彩明度、飽和度的關系,為數控機床配色優化提供方向。研究主要內容包括:1)數控機床配色方式及常用色彩提取。對數控機床配色相關因素中配色方式及色彩進行提取。配色方式包括配色區域、色塊連接方式、美學法則,在研究中通過總結分析獲取其分類結果。常用配色主要使用多維尺度分析法及聚類分析法對現有的色彩進行研究,在此基礎上獲取了其6種常用色相值。2)數控機床配色區域和色彩與配色美度關系研究。在研究中首先通過實驗的方式研究配色區域和配色美度間關系,結果表明正面配色區域與色彩對美度影響顯著。隨后通過實驗研究色彩飽和度及明度變化對配色美度的影響,結果表明明度對美度影響和色相相關,飽和度與美度間關系是隨著飽和度值增加評分增大。在實驗中結合眼動實驗,對實驗結果進行驗證。3)數控機床配色意象特征構建。通過數控機床無彩色造型意象研究及數控機床操作者意象需求研究,以數控機床色彩意象為補充構建數控機床配色意象特征。4)數控機床配色案例系統構建�；诎咐臄�(shù)控機床雙色配色研究以案例知識為驅動,在研究中建立較全面的數控機床案例知識表達,包括產品描述,產品色彩意,產品配色,產品配色方式說明。最后對案例知識的表達,案例系統的檢索、評價、優化及學習進行研究。本課題在數控機床配色研究方面提出了新的研究思路,為數控機床配色優化提供了客觀依據,有效幫助設計師準確掌握操作者及消費者的色彩需求并提高設計師的配色效率。
[Abstract]:With the rapid development of globalization and the improvement of consumer awareness, consumer demand for products has been raised to emotional satisfaction level. As one of the elements of product appearance, color plays an important role in the first reaction of consumers and users to the products. Its emotional association and influence on consumers are far greater than those of shapes and materials. Color research plays an important role in the research of NC machine tools, and it is of great significance to study the color matching of NC machine tools. Based on the research of color image and case knowledge, this subject is a product color matching research. The purpose of this paper is to establish a two-color matching system based on case based NC machine tools through theoretical and experimental research. In the process, the color matching rules of NC machine tools are analyzed and summarized, the color matching image features of NC machine operators are constructed and the case image value matching is completed. On this basis, the case base of color matching is constructed, and the retrieval, evaluation and optimization are carried out. In the study, the relationship between color matching beauty and color matching factors such as color matching region, color brightness and saturation based on 3D model is discussed, which provides a direction for NC machine tool color matching optimization. The main contents are as follows: 1) the color matching method of NC machine tools and the common color extraction. The color matching method and color are extracted from the relevant factors of NC machine tool color matching. The methods of color matching include color matching area, color block connection mode and aesthetic law. In the research, the classification results are obtained by summing up and analyzing. Multi-dimensional scale analysis and clustering analysis are used to study the existing colors in common color matching. Based on this, six kinds of color values are obtained. 2) the color matching region and the relationship between color and color matching beauty of NC machine tools are studied. In the study, the relationship between color matching region and color beauty was studied by experimental method. The results showed that the positive color matching region and color had a significant effect on beauty. Then the influence of color saturation and brightness on color matching beauty was studied experimentally. The results showed that the influence of brightness on beauty was correlated with hue, and the relationship between saturation and beauty increased with the increase of saturation value. Combined with eye movement experiment, the experimental results are verified. 3) the color image features of NC machine tools are constructed. Based on the research on the image of no color modeling of NC machine tool and the research on the image requirement of operator of NC machine tool, the color image of NC machine tool is supplemented by the image of color matching of NC machine tool. 4) the case system of color matching of NC machine tool is constructed. Case based two-color matching study of NC machine tools is driven by case knowledge. In the study, a more comprehensive representation of NC machine tool case knowledge is established, including product description, product color meaning, and description of product color matching method. Finally, case knowledge representation, case system retrieval, evaluation, optimization and learning are studied. In this paper, a new research idea on color matching of NC machine tools is put forward, which provides an objective basis for color matching optimization of NC machine tools, and effectively helps designers to accurately grasp the color needs of operators and consumers and to improve the efficiency of color matching of designers.
【學位授予單位】：陜西科技大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TG659

【參考文獻】

相關期刊論文 前10條

1 蘇暢;付黎明;魏君;李碩;黃蕾;曹越;;基于感性工學和主成分分析的車身色彩設計[J];吉林大學學報(工學版);2016年05期

2 王國新;石學海;閻艷;明振軍;郝佳;;基于實例推理的槍械方案快速設計研究[J];兵工學報;2016年07期

3 鄭晶;王應明;陳圣群;;考慮方案有效性的應急案例決策方法[J];控制與決策;2016年10期

4 王芳;謝志鵬;祝娜;;可穿戴設備記錄元數據框架設計研究[J];圖書與情報;2016年03期

5 朱煒;;基于案例功能知識的產品創新設計方法[J];機械設計;2016年06期

6 黃河;楊明剛;;基于感性工學的老年人智能產品可用性研究[J];機械設計;2016年04期

7 林晨曄;;基于感性工學的定量化色彩趨勢研究[J];包裝工程;2015年18期

8 楊武;楊淼;;基于產業創新系統的創新驅動發展案例研究[J];科技進步與對策;2015年17期

9 龐野營;;日用小家電色彩偏好的眼動評價研究[J];包裝工程;2015年04期

10 羅晨;王欣;蘇春;吳澤;;基于案例推理的夾具設計案例表示與檢索[J];機械工程學報;2015年07期

相關博士學位論文 前2條

1 丁滿;基于意象的產品色彩設計模型與方法研究[D];大連理工大學;2011年

2 張寒凝;現代家具的色彩意象研究[D];南京林業大學;2011年

相關碩士學位論文 前6條

1 余慶;基于意象的煤礦多繩摩擦式提升機色彩設計研究[D];中國礦業大學;2014年

2 禹化寶;基于案例汽車焊裝夾具智能設計系統的研究與開發[D];煙臺大學;2014年

3 陳剛;基于本體的案例表示與檢索研究[D];大慶石油學院;2010年

4 張彬;色彩感知過程模型算法研究[D];哈爾濱工業大學;2009年

5 高敏;數控機床造型設計中色彩應用研究[D];東北大學　;2009年

6 宋妍敏;數控機床CBID系統中的色彩研究與應用[D];湖南大學;2006年

，

本文編號：2386647