【摘要】：利用Gleeble-3500熱力模擬試驗機制備T23鋼焊接接頭中粗晶熱影響區和不同二次熱循環的再熱粗晶熱影響區,并進行STF(Strain-to-fracture)試驗。結果表明,粗晶區經歷1 350℃或780℃二次熱循環后,仍保持粗晶熱影響區的粗大晶粒、筆直的晶界形貌以及高再熱裂紋敏感性,斷面收縮率低于5%。粗晶區經歷了880℃、950℃或1 100℃二次熱循環后,晶粒尺寸變小,晶界變曲折,斷面收縮率分別為24.67%、16.6%和7.24%,再熱裂紋敏感性降低。因此,合理調控二次熱循環的峰值溫度在A_(c1)~A_(c3)之間可以有效降低再熱裂紋敏感性。
[Abstract]:The coarse-grained heat-affected zone (HAZ) and the reheat coarse-grained heat-affected zone (HAZ) of T23 steel welded joints were prepared by Gleeble-3500 thermal simulation machine and STF (Strain-to-fracture) tests were carried out. The results show that after the secondary thermal cycling at 1 350 鈩，

本文編號：2359603