【摘要】：針對沿海變電站電流互感器壓力釋放膜鋁合金法蘭的實際腐蝕失效問題開展研究。通過對鋁合金法蘭成分、腐蝕形貌及腐蝕產物成分等分析,結合實際服役環境特點和電化學腐蝕行為分析,研究了其腐蝕失效原因及機理。結果表明,沿海工業環境下,鋁合金CT壓力釋放膜法蘭發生腐蝕及應力腐蝕開裂(SCC),腐蝕產物以Al的氯化物為主;Cl~-和S~(2-)是造成其腐蝕失效的重要環境因素,Cl~-和應力協同作用導致其SCC,法蘭應采用耐Cl、S腐蝕及抗SCC鋁合金,加強表面防腐蝕設計,不應在沒有防護措施的條件下直接使用7A05鋁合金。
[Abstract]:The actual corrosion failure of aluminum alloy flange with pressure release film of current transformer in coastal substation is studied. By analyzing the composition of aluminum alloy flange, corrosion morphology and corrosion products, combined with the characteristics of actual service environment and electrochemical corrosion behavior, the causes and mechanism of corrosion failure of aluminum alloy flange were studied. The results show that the corrosion and stress corrosion cracking of aluminum alloy CT pressure release film flange are mainly chlorides of Al in the coastal industrial environment. Cl~- and S2- are important environmental factors causing corrosion failure of SCC, flanges. The synergistic effects of Cl~- and stress lead to the use of Cl,S corrosion resistant and SCC resistant aluminum alloys for SCC, flanges, so as to strengthen the surface corrosion resistant design. 7A05 aluminum alloys should not be used directly without protective measures.
【作者單位】： 全球能源互聯網研究院先進輸電技術國家重點實驗室;國網福建省電力有限公司泉州供電公司;國網福建省電力有限公司電力科學研究院;
【基金】：國家電網公司科技項目(5545DW170009)~~
【分類號】：TG172

【相似文獻】

相關期刊論文 前3條

1 張曉昱;閆光宗;歐陽杰;王慶;;電流互感器腐蝕失效原因[J];腐蝕科學與防護技術;2008年03期

2 高闊;于虹;郭鐵橋;;射線數字成像(DR)技術在電力工業檢測中的應用[J];無損檢測;2013年11期

3 一巾;熱線征答[J];農村電工;2003年01期

，

本文編號：2346669