【摘要】：采用9種氟化物對TC4鈦合金進行A-TIG焊接實驗,并利用高速攝像機和漢諾威焊接質量分析儀采集焊接過程中的電弧形態和電壓信號,對焊后焊接接頭的成形參數和宏觀組織進行了對比分析。結果表明:9種氟化物中MgF_2活性劑增加焊縫熔深效果最顯著,達到無活性劑時的2倍,KF居次,但Li F可降低焊縫熔深;相比MgF_2活性劑,KF活性劑的熔寬小,熱影響區寬度窄,接頭總寬度小;Na F活性劑獲得了最小的熱影響區寬度;NaF、KF、MgF_2、Al F3活性劑焊縫的β柱晶生長方向與焊縫中心軸線的傾角比其它活性劑大,柱晶長度由熔深大小決定,柱晶寬度尺寸排序:AlF_3KFMgF_2NaF;熱影響區粗晶區晶粒大小排序:MgF_2NaFAlF_3KF。
[Abstract]:The TC4 titanium alloy was welded by A-TIG with 9 kinds of fluoride. The arc shape and voltage signals were collected by high speed video camera and Hannover welding quality analyzer. The forming parameters and macroscopic microstructure of welded joint after butt welding were compared and analyzed. The results showed that the effect of MgF_2 on weld penetration was the most obvious in the nine fluorides, which was 2 times as high as that of non-active agent, followed by KF, but Li F could decrease the weld penetration. Compared with MgF_2 active agent, the width of KF active agent is smaller, the width of heat-affected zone is narrow, and the width of joint total width of; Na F active agent is the smallest. The orientation of 尾 -columnar crystal growth direction of NaF,KF,MgF_2,Al F _ 3 active seam is larger than that of other active agents, and the length of column crystal is determined by the depth of penetration. The order of column width size is: AlF_3KFMgF_2NaF;. Order of grain size in the coarse-grained region of the heat-affected zone: MgF_2NaFAlF_3KF.
【作者單位】： 內蒙古工業大學;
【基金】：國家自然科學基金(51165027)
【分類號】：TG444.74

【參考文獻】

相關期刊論文 前7條

1 孟龍暉;楊吟飛;何寧;;納米壓痕法測量Ti6Al4V鈦合金室溫蠕變應力指數[J];稀有金屬材料與工程;2016年03期

2 嚴鏗;高莉華;楊剛;肖海林;;單組分活性劑對鋁合金A-TIG焊焊縫的影響[J];焊接學報;2013年02期

3 張瑞華;尹燕;水谷正海;片山，

本文編號：2324276