【摘要】：為提高高速壓電板形儀的在線檢測精度及可靠性,研究張力分布方式、速度制度及載荷特性等對板形檢測信號的影響,研制了一套高速壓電板形儀工業化綜合測試平臺(簡稱"ICP-ITS")。該平臺可實現板形儀的精確動態標定和誤差測試分析,保證了板形信號的準確性。在此基礎上,采用帶鋼驅動和軸向移動式壓輪張力調節機構,模擬板形檢測工業現場,實現了不同浪形的物理模擬和板形信號檢測。試驗結果表明,該平臺能提高板形儀的檢測精度,縮短板形儀的標定上線周期,對促進板形儀的工業化應用具有重要的現實意義。
[Abstract]:In order to improve the accuracy and reliability of on-line detection of high-speed piezoelectric shape gauge, the influence of tension distribution mode, velocity system and load characteristics on shape detection signal is studied. A comprehensive industrial test platform for high speed piezoelectric flatness gauge (ICP-ITS) has been developed. The platform can realize accurate dynamic calibration and error test and analysis of flatness instrument, and ensure the accuracy of shape signal. On this basis, the strip drive and the axial movable press wheel tension adjusting mechanism are used to simulate the industry field of shape detection, and the physical simulation and shape signal detection of different wave shapes are realized. The experimental results show that the platform can improve the precision of flatness meter and shorten the calibration period of flatness meter. It is of great practical significance to promote the industrial application of flatness meter.
【作者單位】： 燕山大學機械工程學院;燕山大學國家冷軋板帶裝備及工藝工程技術研究中心;
【基金】：國家自然科學基金資助項目(51027003);國家自然科學基金重點資助項目(U1560206)
【分類號】：TG334.9
，

本文編號：2316166