發布時間：2018-10-22 13:52

【摘要】：采用超音速火焰噴涂(HVOF)工藝制備了納米結構、雙峰結構和常規結構3種WC-CoCr復合涂層。探討了不同WC粉末粒度對涂層沉積過程的脫碳行為、涂層微觀組織及力學性能的影響。結果表明:隨WC顆粒尺寸減小,涂層脫碳率增大,W_2C含量增加,孔隙率降低,涂層的顯微硬度和界面結合強度增大;但是納米結構涂層中粘結相的非晶化現象嚴重,斷裂韌度顯著下降;雙峰結構涂層因納米、亞微米WC顆粒的合理搭配和協同效應表現出最好的斷裂韌性,同時兼具較高的顯微硬度和界面結合強度。
[Abstract]:Three kinds of WC-CoCr composite coatings, nanostructure, bimodal structure and conventional structure, were prepared by supersonic flame spraying (HVOF) process. The effects of different particle sizes of WC powder on the decarburization behavior, microstructure and mechanical properties of the coating were investigated. The results show that with the decrease of WC particle size, the decarburization rate increases, the WSCC content increases, the porosity decreases, the microhardness and the interface bonding strength increase, but the amorphous phase in the nanostructured coating increases. The bimodal structure coating shows the best fracture toughness due to the reasonable collocation and synergistic effect of nanometers and submicron WC particles as well as high microhardness and interfacial bonding strength.
【作者單位】： 北京科技大學材料科學與工程學院;北京礦冶研究總院北礦新材科技有限公司;
【基金】：國家自然科學基金資助項目(51001117) 北京礦冶研究總院產品開發基金項目(YJZ201404)
【分類號】：TG174.4
，

本文編號：2287332