本文選題：機床 + 平均維修時間　； 參考：《吉林大學學報(工學版)》2017年05期

【摘要】：為合理計算數控組合機床整機平均維修時間,本文提出基于系統組件故障率和維修時間模型來確定系統平均維修時間的方法。根據數控組合機床子系統故障信息,引入平均秩次法進行基于時間相關的子系統故障率建模,進而實現數控組合機床系統故障率建模。結合各子系統維修時間函數,建立了數控組合機床整機平均維修時間模型,并確定了最小故障次數下的整機平均維修時間。本文研究為系統維修時間設計及維修計劃制定奠定了理論基礎。
[Abstract]:In order to reasonably calculate the average maintenance time of NC combined machine tool, this paper presents a method to determine the average maintenance time based on the failure rate and maintenance time model of system components. According to the fault information of CNC machine tool subsystem, the average rank method is introduced to model the failure rate of the subsystem based on time correlation, and then the fault rate modeling of NC composite machine tool system is realized. Combined with the maintenance time function of each subsystem, the average maintenance time model of NC combined machine tool is established, and the average maintenance time of the whole machine is determined under the minimum number of failures. This paper lays a theoretical foundation for system maintenance time design and maintenance plan formulation.
【作者單位】： 吉林大學機械科學與工程學院;
【基金】：國家科技重大專項項目(2015ZX04003002) 吉林省科技發展計劃項目(20150101025JC)
【分類號】：TG659
，

本文編號：2094593