本文選題：扭振 + CSP軋機��； 參考：《機械工程學報》2017年10期

【摘要】：為研究薄板坯連鑄連軋CSP軋機在軋制高強薄帶鋼時出現強烈振動這一普遍難題,利用軋機在線監測系統獲取振動信號,分析得出CSP軋機存在電氣驅動、機械傳動及輥系壓下耦合振動且振動信號表現出非線性諧波特征。以F3軋機主傳動扭振問題為研究對象,通過建立傳動等效非線性2自由度系統模型,將電氣驅動諧波和軋制力諧波作為外擾激勵施加到模型求解,結果顯示軋機主傳動在多源激勵下存在超諧、亞諧及組合共振等多態特征。以w_1-w_2≈w-n型組合共振為例求解獲得振動響應幅值隨阻尼一次、三次項減小和剛度三次項、初始加載及諧波激勵增大而增大的結論。由此制定利用抑制電氣驅動電流諧波和軋制力諧波來抑制軋機傳動扭振方案,試驗結果表明振動幅值降低75%,取得顯著效果。本文研究?jī)?nèi)容對深入認識傳動非線性動力學特性與軋機系統耦合振動機理以及振動抑制提供參考。
[Abstract]:In order to study the strong vibration of thin slab continuous casting and rolling CSP mill when rolling high strength thin strip, the vibration signal was obtained by on-line monitoring system of rolling mill, and the electric drive of CSP mill was analyzed. The coupling vibration of mechanical transmission and roll system under pressure and the vibration signal shows nonlinear harmonic characteristic. Taking the torsional vibration of the main drive of F3 mill as the research object, the electric drive harmonic and rolling force harmonic are applied to the model by establishing the drive equivalent nonlinear two-degree-of-freedom system model. The results show that the main drive of rolling mill has the characteristics of superharmonic subharmonic and combined resonance under multi-source excitation. Taking w_1-w_2 鈮，

本文編號：1959153