本文選題：噴射混凝土 + 小型濕噴機��； 參考：《人民長江》2017年16期

【摘要】：為研究噴射混凝土性能更接近于現場實際濕噴工況(大型濕噴工藝)的室內澆筑工藝,以9組C40纖維噴射混凝土為例,通過測試其回彈率、一次噴射厚度、凝結時間、密度、抗壓強度、彎曲韌性和干縮變形等性能指標,對比了在混凝土拌和物中摻加速凝劑快速攪拌振動成型制作試件(攪拌振動工藝)和應用小型濕噴機噴射施工(小型濕噴工藝)兩種工藝下所得混凝土性能之間的差異。結果表明:與攪拌振動工藝相比,小型濕噴工藝成型混凝土試件的凝結時間、密度、抗壓強度與大型濕噴工藝更吻合;小型濕噴工藝還能測試回彈率、一次噴射厚度,可用于評價濕噴混凝土的可噴性。
[Abstract]:In order to study the indoor pouring process in which the performance of sprayed concrete is closer to the actual wet jet condition (large wet jet process), 9 groups of C40 fiber sprayed concrete are taken as examples. The springback rate, the thickness of the primary spray, the setting time and the density of the concrete are tested. Compressive strength, flexural toughness and dry shrinkage deformation, etc. The difference between the performance of concrete made by rapid agitation vibration molding (agitation vibration process) and spray construction (small wet jet process) by using small wet jet machine in concrete mixture is compared in this paper. The results show that the setting time, density and compressive strength of concrete specimen formed by small wet jet process are more consistent with those of large wet jet process, and the springback rate and the thickness of single spray can be measured by small wet jet process. It can be used to evaluate the jetting ability of wet shotcreting concrete.
【作者單位】： 南京水利科學研究院水文水資源與水利工程科學國家重點實驗室;中國水利水電第七工程局有限公司;
【基金】：國家重點研發計劃課題(2016YFC0401610) 江蘇省自然科學基金項目(BK20151072) 中央級公益性科研院所基本科研業務費專項資金項目(Y416003) 中國水利水電第七工程局有限公司項目(2015-458-20)
【分類號】：TU528.53
，

本文編號：2060655