本文選題：磷酸一銨 + 磷銨母液��； 參考：《無機鹽工業》2017年10期

【摘要】：通過對工業磷銨母液進行反調pH反應、過濾、濃縮和結晶等過程,實現磷銨循環利用。以工業磷銨母液為原料,分別從反應溫度、pH、濃縮相對密度、結晶溫度、結晶時間等因素探究對制備工業磷酸一銨的影響。通過X射線衍射(XRD)對產品進行表征,同時測定產品的五氧化二磷和氮含量。結果表明其最優的工藝條件:反應溫度為80℃、pH為4.1、濃縮相對密度為1.38、結晶溫度為20℃、結晶時間為60 min。此條件下,五氧化二磷和氮含量都符合工業磷酸一銨Ⅰ類標準。
[Abstract]:Ammonium phosphate recycling was realized by reverse pH adjustment, filtration, concentration and crystallization of industrial ammonium phosphate mother liquor. The effects of reaction temperature (pH), concentration relative density, crystallization temperature and crystallization time on the preparation of industrial ammonium phosphate were investigated. The product was characterized by X ray diffraction (XRD) and the content of phosphorus pentoxide and nitrogen was determined at the same time. The results showed that the optimum technological conditions were as follows: reaction temperature 80 鈩，

本文編號：1918912