本文選題：泡沫玻璃 + 氧化鋁纖維�。� 參考：《材料科學與工程學報》2017年01期

【摘要】：本文以廢玻璃粉為原料,CaCO_3為發泡劑,氧化鋁纖維為增強劑,采用熔融發泡法制備泡沫玻璃。研究了發泡溫度、發泡劑含量、纖維含量等因素對泡沫玻璃性能的影響。采用材料試驗機、SEM、阿基米德法分析測試手段,對泡沫玻璃氣泡結構、體積密度、氣孔率以及抗壓強度等進行了表征和分析。結果顯示:隨著氧化鋁纖維含量的增加,泡沫玻璃的強度提高,氣孔逐漸減小,均勻性變差。當氧化鋁纖維含量為5%,發泡劑含量4%,燒結溫度為820℃時,樣品的平均抗壓強度為3.5MPa、抗折強度為1.6MPa、氣孔率為84%。
[Abstract]:In this paper, foamed glass was prepared by melting foaming method with waste glass powder as raw material CaCO3 as foaming agent and alumina fiber as reinforcer. The effects of foaming temperature, foaming agent content and fiber content on the properties of foamed glass were studied. The bubble structure, bulk density, porosity and compressive strength of foamed glass were characterized and analyzed by means of material testing machine (SEM) and Archimedes method. The results show that with the increase of alumina fiber content, the strength of foamed glass increases, the porosity decreases and the uniformity becomes worse. When the alumina fiber content is 5, foaming agent content is 4 and sintering temperature is 820 鈩，

本文編號：1913445