本文選題：經編間隔織物　切入點：泡沫混凝土　出處：《新型建筑材料》2017年08期 　論文類型：期刊論文

【摘要】：采用一種具有三維中空結構的經編間隔織物增強泡沫混凝土,并對經編間隔織物進行不同方式的樹脂浸漬處理,得到4種不同的增強材料,研究不同增強材料對泡沫混凝土力學性能的影響。研究表明,增強材料的加入對泡沫混凝土的密度及吸水率沒有明顯影響,但顯著提高了泡沫混凝土的抗壓強度和彎曲強度。其中,以經編間隔織物整體浸漬樹脂作為增強體對泡沫混凝土的增強增韌效果最明顯,抗壓強度和彎曲強度分別提高了128.4%和553.8%。同時,由于經編間隔織物經緯向紗線密度的差異,造成復合材料的彎曲強度存在各向異性。經編間隔織物提高了泡沫混凝土的抗變形能力,改善了泡沫混凝土的破壞模式。
[Abstract]:A kind of warp knitted spacer reinforced foam concrete with three dimensional hollow structure was used. Four kinds of reinforcing materials were obtained by different resin impregnation of warp knitted spacer fabric. The effects of different reinforced materials on the mechanical properties of foamed concrete are studied. The results show that the addition of reinforced materials has no obvious effect on the density and water absorption of foamed concrete. But the compressive strength and flexural strength of foamed concrete were significantly improved. The compressive strength and bending strength are increased by 128.4% and 553.8.The density of warp and weft yarns of warp knitted spacers is different, The flexural strength of composites is anisotropic and warp knitted spacer fabric can improve the deformation resistance of foam concrete and the failure mode of foam concrete.
【作者單位】： 天津工業大學紡織學院;天津工業大學先進紡織復合材料教育部重點實驗室;福建福聯經編有限公司;
【分類號】：TU528.2
，

本文編號：1598356