乳酶生菌種脂肪酸組分的GC-MS檢測分析
發布時間:2019-07-08 10:45
【摘要】:目的:建立氣相色譜-質譜聯用法測定乳酶生菌種的脂肪酸成分,并對各試樣菌株間的同源性進行分析。方法:應用14%三氟化硼-甲醇法對菌株進行脂肪酸甲酯化,采用HP-5MS毛細管色譜柱(30 m×0.250 mm×0.25μm),載氣為氦氣,程序升溫(120℃,5 min;6℃·min~(-1)升至240℃,10 min;10℃·min~(-1)至260℃,2 min),進樣口溫度250℃,選擇EI離子源,溶劑延遲3 min,質譜掃描m/z 35~450。結果:腸球菌屬的菌株均具有十四碳烷酸、十六碳烷酸、十六碳烯酸、十八碳烷酸、十八碳烯酸及十九碳烷酸特征峰;批號為20100922和20101001的乳酶生片菌株與海氏腸球菌CGMCC1.595之間,6家生產企業的其他乳酶生片菌株與糞腸球菌140623和屎腸球菌CGMCC1.131之間,具有相似的氣相色譜圖及相近的脂肪酸組分比值。結論:本方法可用于乳酶生菌種的快速鑒定及同源性分析。
文內圖片:
圖片說明:脂肪酸甲酯混合對照品氣相色譜質譜總離子流圖Fig.1GC-MStotalionchromatogramofmixedfattyacidmethylester(FAME)referencestandards
[Abstract]:Objective: To establish gas chromatography-mass spectrometry (GC-MS) to determine the fatty acid components of lactase and to analyze the homology among the strains. The method comprises the following steps of: carrying out fatty acid methyl esterification on a strain by using a 14% boron trifluoride-methanol method, and adopting an HP-5MS capillary chromatographic column (30 m-0.250 mm and 0.25. mu.m), the carrier gas is helium, the temperature of the program is increased (120 DEG C,5 min,6 DEG C. min-(-1) to 240 DEG C,10 min,10 DEG C. min-(-1) to 260 DEG C and 2 min), The temperature of the injection port is 250 鈩,
本文編號:2511533
文內圖片:
圖片說明:脂肪酸甲酯混合對照品氣相色譜質譜總離子流圖Fig.1GC-MStotalionchromatogramofmixedfattyacidmethylester(FAME)referencestandards
[Abstract]:Objective: To establish gas chromatography-mass spectrometry (GC-MS) to determine the fatty acid components of lactase and to analyze the homology among the strains. The method comprises the following steps of: carrying out fatty acid methyl esterification on a strain by using a 14% boron trifluoride-methanol method, and adopting an HP-5MS capillary chromatographic column (30 m-0.250 mm and 0.25. mu.m), the carrier gas is helium, the temperature of the program is increased (120 DEG C,5 min,6 DEG C. min-(-1) to 240 DEG C,10 min,10 DEG C. min-(-1) to 260 DEG C and 2 min), The temperature of the injection port is 250 鈩,
本文編號:2511533
本文鏈接:http://sikaile.net/kejilunwen/huaxue/2511533.html
最近更新
教材專著