本文選題：氫鍵金屬-有機框架材料 + 慢擴散合成法�。� 參考：《化工學報》2017年01期

【摘要】：以腺嘌呤和溴化銅(氯化銅)為原料,采用慢擴散合成法,合成多孔氫鍵金屬-有機框架材料MPM-1-Br和MPM-1-Cl。采用SEM、PXRD、TGA及比表面積分析等技術對材料進行綜合表征,并測定了此二種同構多孔氫鍵金屬-有機框架材料對乙炔和二氧化碳單組分氣體的吸附等溫線。實驗結果表明,MPM-1-Br和MPM-1-Cl的比表面積分別為373 m~2·g~(-1)和417 m~2·g~(-1),且在240℃的溫度范圍內有良好的穩定性;在298 K和總壓100 kPa下,通過IAST理論計算得到其對C_2H_2/CO_2混合氣體(體積比50:50)的吸附選擇性分別達到了3.8和3.0,與HKUST-1(4.7)和UTSA-30(3.3)等金屬-有機框架材料有相當?shù)姆蛛x性能。
[Abstract]:Porous hydrogen bonding metal-organic frame materials MPM-1-Br and MPM-1-Cl were synthesized from adenine and copper bromide (cupric chloride) by slow diffusion synthesis. The adsorption isotherms of acetylene and carbon dioxide one-component gases were determined by means of SEMP-PXRDGA and specific surface area analysis, and the adsorption isotherms of the two isomorphic porous hydrogen bonding metal-organic framework materials for acetylene and carbon dioxide were determined. The experimental results show that the specific surface areas of MPM-1-Br and MPM-1-Cl are 373mtmc2gn-1) and 417mt2gc-1, respectively, and have good stability in the temperature range of 240 鈩，

本文編號：1917218