發布時間：2018-05-31 02:06

  本文選題：微型燃燒器 + 開縫鈍體��； 參考：《力學季刊》2016年03期

【摘要】：本文將開縫鈍體穩燃技術應用于微型燃燒器中,采用詳細化學反應機理模擬了不同速度下微型開縫鈍體燃燒器與微型常規鈍體燃燒器的燃燒情況.結果表明:開縫鈍體燃燒器火焰寬度一致性較好,火焰中心溫度沿軸向分布更加均勻,尤其在速度較大時,開縫鈍體燃燒器優勢更加明顯;開縫鈍體燃燒器燃燒效率高于常規鈍體燃燒器,速度大于25m/s時,開縫鈍體燃燒器效率高出常規鈍體燃燒器5%左右;由于開縫鈍體中鈍體縫隙過大,瀕臨吹熄極限時,鈍體后值班火焰被吹熄,開縫鈍體燃燒器吹熄極限略有降低.
[Abstract]:In this paper, the slit blunt body steady combustion technology is applied to the micro burner. The combustion of the micro slit obtuse body burner and the micro conventional blunt body burner at different velocities are simulated by using the detailed chemical reaction mechanism. The results show that the flame width of the slit blunt body burner is consistent and the flame center temperature is more uniform along the axial direction, especially when the velocity is higher, the advantage of the slit blunt body burner is more obvious. The combustion efficiency of the slit blunt body burner is higher than that of the conventional blunt body burner. When the speed is higher than that of the conventional blunt body burner, the efficiency of the slit blunt body burner is about 5% higher than that of the conventional blunt body burner. The flame on duty after the blunt body is blown out, and the blowout limit of the slit blunt body burner is slightly reduced.
【作者單位】： 上海理工大學能源與動力工程學院;
【基金】：國家自然科學基金(51176127) 高等學校博士學科點專項科研基金(20123120110009)
【分類號】：TK16

【相似文獻】

相關期刊論文 前10條

1 史學鋒,馬曉茜,羅萌,王平,錢壬章;縫寬對開縫鈍體燃燒器著火及燃燒影響的研究[J];燃燒科學與技術;1997年03期

2 張新科,鄭U，

本文編號：1957841