本文選題：永磁同步電機 + 直接轉矩控制�。� 參考：《電機與控制學報》2014年09期

【摘要】：為拓寬直接轉矩控制(direct torque control,DTC)方式下永磁同步電機(permanent magnet synchronous motors,PMSM)系統的高速運行范圍,系統地分析了PMSM系統在最大轉矩電流比、恒功率轉速比和最大轉矩電壓比3種運行方式下的特點。根據DTC穩定運行要求,提出了基于轉矩角限幅的空間矢量調制(space vector modulation,SVM)-DTC方法,拓寬了PMSM的高速穩定運行范圍。其次利用定子磁鏈定向兩相同步旋轉坐標系下PMSM的數學模型,提出了基于改進轉矩給定的DTC方法。仿真研究表明,改進方法均保留了DTC固有的動態性能優異、計算方便等優點,均可拓寬PMSM的高速運行范圍。其中,基于改進轉矩給定的DTC方法可使電機在同時滿足電流和電壓限幅的狀態下實現高速穩定運行,性能更優。
[Abstract]:In order to widen the high speed operation range of permanent magnet synchronous motor (PMSM) system under direct torque control (DTC) mode, the maximum torque / current ratio of PMSM system is analyzed systematically. The characteristics of constant power speed ratio and maximum torque voltage ratio in three operation modes. According to the requirement of stable operation of DTC, the space vector modulation space vector modulationsSVMM-DTC method based on torque angle limit is proposed, which widens the high speed and stable operation range of PMSM. Secondly, using the mathematical model of PMSM in stator flux oriented two-phase synchronous rotating coordinate system, a DTC method based on improved torque is proposed. The simulation results show that the improved methods retain the advantages of excellent dynamic performance and convenient calculation of DTC, and can widen the range of high-speed operation of PMSM. Among them, the DTC method based on the improved torque can make the motor run at high speed and stable under the condition of current and voltage limiting simultaneously, and the performance is better.
【作者單位】： 浙江大學電氣工程學院;
【基金】：國家自然科學基金(51377141) 國家863計劃(2011AA11A101)
【分類號】：TM341

【參考文獻】

相關期刊論文 前2條

1 裘君;趙光宙;;永磁同步電機磁鏈自適應控制[J];電機與控制學報;2009年06期

2 萬健如;宮成;劉f，

本文編號：1861518