基于紅外原理的高壓設備狀態檢測方法與應用研究
本文選題:高壓電氣設備 切入點:紅外熱像 出處:《華中科技大學》2014年碩士論文
【摘要】:隨著時代的發展,電力行業獲得了長足進步,電力系統中需要對各種高壓油浸式電氣設備進行在線監測和安全預警,發現故障并采取辦法消除隱患。紅外熱像技術作為一種有效的故障診斷方法已獲得了廣泛應用。通過理論分析計算得出高壓油浸電氣設備表面熱參數與發熱源熱參數的關系,,解決紅外熱像技術不能獲取物體內部熱參數問題對提高高壓油浸式電氣設備故障監測水平,對電網能安全運行具有重要意義。 本文基于紅外熱像設備只能檢測到物體表面發出的紅外電磁波,而發熱源產生的熱損耗是導致高壓電氣設備熱故障的主要原因,提出了熱路模擬電路的思路,將高壓電氣設備中復雜的熱關系等效為熱路模型,重點分析高壓電氣設備外表面熱參數和發熱源熱參數的相關關系,比較紅外熱像設備觀測到的紅外圖像和理論分析得到的高壓電氣設備外表面的熱參數,來對高壓電氣設備熱故障尤其是充油高壓電氣設備的油位進行診斷。 針對紅外熱像設備只能檢測到物體表面發出的紅外電磁波,提出了非電類模擬電系統的方法通過電流場數學模型與熱流場數學模型的比擬分析以及用熱路模擬電路并應用到了高壓電氣設備內部熱過程中。通過對高壓電氣設備熱過程進行模擬實驗,驗證了熱路模擬電路的可行性,得出高壓油浸電氣設備表面溫度參數與發熱源溫度參數是具有一定的比例關系,從而能對高壓電氣設備熱故障尤其是充油高壓電氣設備的油位進行診斷。
[Abstract]:With the development of the times, the electric power industry has made great progress. It is necessary to carry out on-line monitoring and safety warning of various high-voltage oil-immersed electrical equipment in the power system. The infrared thermal imaging technology has been widely used as an effective fault diagnosis method. Through theoretical analysis and calculation, the relationship between surface heat parameters and heat source parameters of high pressure oil-immersed electrical equipment is obtained. Solving the problem that infrared thermal imaging technology can not obtain the internal thermal parameters of objects is of great significance to improve the level of fault monitoring of high voltage oil-immersed electrical equipment and to the safe operation of power grid. Based on the fact that infrared electromagnetic waves from the surface of the object can only be detected by infrared thermal imaging equipment and that the heat loss caused by the heat source is the main cause of the thermal failure of high voltage electrical equipment, this paper puts forward the idea of the thermal circuit simulation circuit. The complex thermal relationship in high voltage electrical equipment is equivalent to the thermal circuit model, and the correlation between the heat parameters of the outer surface and the heat source of the high voltage electrical equipment is analyzed. By comparing the infrared images observed by infrared thermal imaging equipment and the thermal parameters of the outer surface of high-voltage electrical equipment obtained by theoretical analysis, the thermal fault of high-voltage electrical equipment, especially the oil level of oil-filled high-voltage electrical equipment, is diagnosed. Infrared thermal imaging equipment can only detect infrared electromagnetic waves emitted on the surface of objects. The method of non-electric analog electric system is put forward by comparing the mathematical model of the current field with the mathematical model of the heat flow field and using the thermal circuit to simulate the internal thermal process of the high-voltage electrical equipment. The thermal process of the equipment is simulated, The feasibility of the hot circuit simulation circuit is verified. It is concluded that the surface temperature parameters of high pressure oil-immersed electrical equipment are proportional to the heat source temperature parameters. Thus, the thermal fault of high voltage electrical equipment, especially the oil level of oil-filled high-voltage electrical equipment, can be diagnosed.
【學位授予單位】:華中科技大學
【學位級別】:碩士
【學位授予年份】:2014
【分類號】:TN219;TM507
【相似文獻】
相關期刊論文 前10條
1 П.М.Сви;張古銀;;工作電壓下高壓電氣設備的監測[J];變壓器;1983年12期
2 陳小富;;關于高壓電氣設備試驗與安全管理的探討[J];科技致富向?qū)?2014年14期
3 余振杰;;小議高壓電氣設備試驗與安全管理[J];沿海企業與科技;2009年08期
4 盧瑛;吳國忠;;智能型高壓電氣設備溫度監測預警系統[J];中國電力;2010年03期
5 喻虹;寇松彬;;淺談高壓電氣設備的故障機理和監測技術[J];科技傳播;2010年16期
6 吉亞民;;江蘇并網電廠主要高壓電氣設備運行異常分析[J];江蘇電機工程;2011年05期
7 韋紅云;;高壓電氣設備維護營銷對策探析[J];廣西電業;2013年Z1期
8 李鳳軍;;關于高壓電氣設備試驗的重要性與相關技術問題的探討[J];電工文摘;2013年03期
9 楊能益;;清潔高壓電氣設備的新材料——玉米棒顆粒[J];電工技術;1989年06期
10 張國慶;楊源龍;劉躍凱;;檢測運行高壓電氣設備過熱隱患的研究[J];華北電力技術;1991年10期
相關會議論文 前3條
1 張樹榆;田森;;討論高壓電氣設備選型及校驗[A];天津市電視技術研究會2014年年會論文集[C];2014年
2 雷鳴;;高壓電氣設備內部缺陷的紅外診斷研究[A];第三屆廣西青年學術年會論文集(自然科學篇)[C];2004年
3 彭玉林;李紅軍;劉楠;李亭;;SF_6氣體水分管理標準探討及密度濕度監測的研究[A];2008年云南電力技術論壇論文集[C];2008年
相關博士學位論文 前1條
1 李亞琦;電瓷型高壓電氣設備體系抗震性能分析[D];中國地震局地球物理研究所;2002年
相關碩士學位論文 前9條
1 張慧浩;基于光纖傳感技術的高壓電氣設備溫變故障監測預警系統[D];河北科技大學;2015年
2 潘輝;基于紫外光信號的高壓電氣設備放電檢測研究[D];重慶大學;2015年
3 夏巍;基于紅外原理的高壓設備狀態檢測方法與應用研究[D];華中科技大學;2014年
4 韓京津;基于光纖傳感技術的高壓電氣設備溫度監測預警系統[D];河北科技大學;2013年
5 楊長青;基于地震動參數高壓電氣設備的易損性分析[D];中國地震局工程力學研究所;2011年
6 武建華;基于紫外成像的高壓電氣設備外絕緣檢測的研究[D];華北電力大學(河北);2008年
7 劉敏;GIS高壓電氣設備抗震性能試驗研究[D];西安建筑科技大學;2013年
8 闞長遠;變壓器和六氟化硫開關四種典型故障分析[D];華北電力大學;2014年
9 秦國防;分散型高壓電氣設備溫度巡回監測系統的研制[D];重慶大學;2006年
本文編號:1658832
本文鏈接:http://sikaile.net/kejilunwen/dianlilw/1658832.html